prinsloo.pieter

Thanks, i managed to updated the firmware, thanks for the response

Hi, thanks for the response. I restarted, updated the SBU firmware 2.66 and then the main firmware 71.97, all worked perfectly now. It is so sad that the suppliers in SA could not helped me, support is non existent. I bought the Hubble 5.5kw battery with the Axpert King. I was under the impression that the BMS will work with the configuration but i was told now that the Hubble is Riot Ready. Feedback from the supplier: "This used to be available on the X-100 model only. Since then we moved away from Modbus. Full integration is only now with a RIOT." "A.I. CAN Bus Not your ordinary CAN Bus. The RIOT Cloudlink has its own RIOT Can Bus protocol. This protocol encapsulates 5 different CAN Bus protocols. When you connect the RIOT device to a CAN Bus enabled Inverter, the RIOT will automatically detect the correct CAN Bus protocol to use through its A.I. (Artificial Intelligence) technology and then enable the best protocol for your inverter. A.I. ENABLED Cloud Monitoring The RIOT connects to the Hubble BMS battery through the BMS RS232 port. This enables the RIOT Cloudlink to interface directly with our BMS and report all statistics and alarms to the cloud for remote monitoring. Complete battery monitoring over the cloud was a high requirement for our installers that need to monitor their clients’ batteries offsite to maintain, monitor, troubleshoot and ensure smooth operation of the installation for their client’s investment." Apparently i need to get a RIOT CloudLink. I have a Raspberry PI 3ModelB that i use to monitor the system remotely using the ICC software. My question is, can the BMS capability be managed by the Inverter or via Raspberry PI using the ICC software, or what will be the best approach? Thank you

Hi, I connected my laptop using the correct serial port and started to update the inverter. I might have done the upgrade not in the right sequence. I updated the remote panel to 02.66, then when i wanted to update the firmware, the tool failed at step 1, cannot open comm. My LCD display is dead now, no lights or any values displayed, i assume the display cannot talk to the inverter due to the version mismatch ? Will i be able to recover from his point?