Anton654

Hi, trying to charge my battery with my generator., prolonged power outage in PTA. I have a Royobi 2kva (1750w) inverter generator and a 5kva inverter with a 5.12kwh Dyness battery(trolley inverter) I have changed the current and start/end settings accordingly (soc) but when I plug the unit into the generator it sounds as if the generator is taking heavy strain, and it sounds as if the inverter is switching on and off continuesly. Do I perhaps need to change this setting as well? Or is the power generated by the generator not sufficient? Only the inverter is connected to the generator.

My previous issue related to the EPS voltage high error seems to have sorted itself out, haven't had an issue since 16/12. Thanks for all the replies. Being at home more I have noticed that the inverter switches on quite a few times an hour, like it is charging or something. It is only connecting to the grid, using it as a back up during loadshedding. You can hear the fans running and this continues for about 5 min at a time and then it is silent again. This happens whether we have loadshedding or not. I timed it for an hour earlier and it seems to happen every 20 minutes and runs for 5 minutes at time before switching of again. Is this normal or is it maby settings issues? Thanks!

Thanks, I will try that 👍

Hi, I recently got a 5kva LuxPowerTek inverter with a Dyness lit battery. You have an option to monitor the setup on an app. I got an error this morning, when loadshedding started it was unable to supply backup power. I restarted the inverter and then it was working afterwards. The inverter is not connected to the db board, it comes as a pre assembled trollie setup. I noticed on the app that I got the same errors since I got it and it seems to occur everytime loadshedding starts and when it switches over to supply backup power. Error EPS Voltage High. Can anyone maybe assist or advice. Thanks.