Niels

Hi Cef. Thanks a lot again. Works fine, just an issue with the size of the letters in W11. I took a screenshot. I tried also compatibility mode W8 while compatibly mode in W11 ends with W8. This did not change the letter size issue. I can not remember this to happen with W10 and the 3.10 Version. While I have still the drive with W10 and 3.10 available, I will install it and will have a look. While it dark here in Germany, I will have a look tomorrow, if there is hopefully some sunshine around. Speak to you Niels

Hi Cef After beeing a real fan of the 3.10 Version, I am looking very much forward to have a deep dive into 3.40. While switching to W11, would be interesting, if it works seamless as well in W11. Will keep you updated.

Hi Cef, as I sayed, I try to do my best, which is obviously not close to perfect. But however, now I undestand the system of sending better as before. Anyhow, after looking into 3.10 Version I am getting a real fan of your work. Great piece of software you are giving away. By the way. I am using a seplos BMS and this is sending battery informations to the Inverter. The BMS has an integrated coulomb meter and seams to give a realistic information about charging, discharging, DOD or DOC ... I include a screenshot... Have a nice evening Niels

Hi Barrels. Do you have communication with the BMS itself? To be honnest, I do not know, how Pylontech is build, but from outside it looked like using a Seplos BMS. I use a Seplos with my own build battery pack 16x 200 AH prismatic cells. This BMS communicates with the Pylontech CAN protocoll with my Goodwe Hybrid Inverter GW3648D-ES and has a good software for real time view of the battery data as well as setting up the BMS. May be the software could be of help for you, but as I sayed above... Niels