Mo1989

Could I see what your battery settings look like

Thank you for this. I had an issue with a F56 fault error but it only occurs when there's load shedding and if my discharge is say at 6kw or so it gives me that error

What would the correct AH be once I do the above

Hi guys, anyone with a Deye 8kw and 2x5.5 Hubbles. Could someone advise what the charge and discharge AH be? Hubble says 110AH on the website but if you have two batteries should it still be 110AH. Also mines always revert to 100AH even if I try 110AH.

My neighbor came and did a factory reset and drained my batteries. It seems to be working now. Thanks for all the input guys

Tried that now no luck

Both are done

How do I lower the minimum battery percentage. Below is my time of use settings. The min was on all 20 percent but increased the 1pm slot to cater for load shedding

If I put the grid on this is what happens

Yes the grid is switched off

Please see below pic

How did you resolve it?

1. I'm not sure on this question 2. Yes 3. Yes 4. Yes 5. Yes 6. Yes 7. Yes 8. Yes 9. Yes

The only way it seems to work is if I manually cut off eskom

The only error codes I have is F56 but that was before this happened. The batteries are 2 x Hubble 5.5 AM2