Moluh Deredd

can some help show me Deye charge controller section on the motherboard?

Hey Victor I am facing this same problem Were you able to solve this??

I received two Deye 6kw inverters that got damaged through high voltage from the grid input. One of the deye had a faulty DC MOSFET. After replacing them, the machine is coming on now but no AC output. I have checked the other IGBTS and they all are correct Any suggestions as to how to repair it???

Ooo I just getting to know this

It is Hybrid??

How can I join that WhatsApp group?? Or can you assist me with your WhatsApp number??

Check this photos please https://m.facebook.com/story.php?story_fbid=3683557998536781&id=100006478519562

https://m.facebook.com/story.php?story_fbid=3681117412114173&id=100006478519562

I am trying to upload photos but still facing difficulties.

Do you have a WhatsApp number that i can send you photos??

Hello guys I am working on a 10kw Jarrett inverter and firstly there was no display or power. Now i do have power but there is no AC output. Can someone help me locate the AC section on this circuit??

Ahhh How are you? You been offline Coulomb Thanks I did solve the error 53 by charging two smd diode alone with a TX7 transformer which was causing the problem. Thank you so much Coulomb. How do you think i can solve error 07 problem?

Hello can someone help to understand what causes error 53?? i have an inverter that i am repairing and it is on error 53.

Hello can someone help to understand what causes error 53?? i have an inverter that i am repairing and it is on error 53.

Hello Coloumb i did solved the error 52 and thanks for the efforts Chief. I wanted to ask you what causes an inverter to have error 53??

have you fixed a problem with an inverter that comes on and then go off by killing one of the dc transistors or mosfet??

Hahaha it was i who kill it, it was dead already. I am here trying to get a substitute for that I did tried getting the datasheet for substitutes, but can't find it. can you help??

Can i use this Transistor as substitute to the one on the left?

Hello Coulomb!! I am working on an inverter that has error 53. It firstly had a shorts. when i put it on, and the relay at the mppt charge controller clicked. it goes off. i did checked the dc transistors and Ac transistors. They are all correct. following the TX7 location. i did disconnected a diode like SMc connecting the T350 five drivers and it will come on and displayed error 53. what do you think is the problem??

thank you so much!! I once had another problem with a hybird inverter that just come on and when the relay clicked. It goes off. i did disconnected the line going to the MPPT charger controller and it is now coming on standy but goes on error 09. when connected it comes on and goes off. what do think would be the problems?? i did checked the DC mosfets and they are all good

So what do you think causes error 57 and 53. As one reads current sensor failed 57 and 53 inverter soft start failed. Have you come accross such problems like this??

i am working on a 6000kw inverter that is now reading on error 52( bus voltages too low). i did changed the capacitors at the ac section and it is still reading at error 52. when it comes on, the current goes to 201 and keep dropping down util the error 52 shows. What can i done to solve such problem??