percy

Ok will try when we have blue sky again. Have not connected the genny to the inverter to test , but will give it a try. Thank you for your advice.

Yes presently pumping water with 6.5kw generator. connected battery is SVOLT 51.2v 106 ah 5.43 kwh. battery

Conderenergy 6.5kw inverter trips on 1.1kw borehole pump startup. I have 6 x 450 watt mono panels connected in series, off grid system. If I change the inverter load properties from SBU to USB will it be possible to use the generator for the strartup rush of about 21amp and then switch the gennerator of for solar to take over the load or will the transfer lapse be to long. Inverter specs say UPS lapse 10m/s Appliances lapse 20m/s . Thank you

Thanks for the advice

HI Need to say that it is a off grid system

Hi Max Pv Array Power 6500w , Pv Array charge voltage 60vdc - 500vdc, Max gharge current Pv plus Ac 120amp , Nominal Pv voltage 360vdc Thank you

Hi I have a 1.1kw borehole pump it draws around 22amp on srartup. i have a 6.5kw hibrid inverter and a 105kw litium battery in my system. I need advice on purchasing the following solar panels, Sungold 450w mono panels x 6, I want to run two strings of 3 panels in parralel . The panel specs is Voc 41.58v Vmp 34.65v isc 14.03 amp. Advice will be appreciated as money is limited. Thank you

I have changed the wiring of the communication cable pins, the error 20 do not show up any more, but error 04 show up although the battery is fully charged. The L1 icon next to battery is solid not flashing as previously.Any further advice will be appreciated.