CJ Solar

I tried the following, but to no avail... BYD BOX: Pin 4 = Can H Pin 5 = Can L Pin 6 = Gnd Sunsynk: Pin 4 = Can h Pin 5 = Can L Pin = Gnd I connected accordingly, but no battery info displayed on the Sunsynk...? The BYD Box Battery only run for an few minutes without CAN Communication, then it disconnects the battery...? How can I make these 2 communicate or at least let the battery remains on and run the Sunsynk on voltage base settings for the battery charge...?

Hi... I am having an challenge to connect the CAN Bus on an BYD B-Bos Pro 13.8 battery to an Sunsynk 5Kw Inverter...? I can see on the BYD Box it is Pin 4 =CAN H and Pin 5 = CAN L, the pin for the Sunsynk Inverter is the same, so if I just cross Wires on Pin 4 and 5 all should be good to go. Did anyone do this connection already and can share some info please...? The installation is outside of town so I need to drive back to try and make it work... Thanks...

Hi Team I would like to know if any of you did some works to connect and BYD Battery Box Pro 13.8 to and 5Kw Sunsynk Inverter. From What I can find the BYD Battery Box Pro use pin 4=Can H and Pin 5 = Can L And the Sunsynk use the same, so and cross connection cale to connect these should work...? Thanks...