Kortsluiting

I need assistance from someone with knowledge of the Kodak OG3.24 inverter. It is paired with two Revov 200ah batteries. Battery app shows that the batteries only charge to 80%. On the inverter screen it says batteries are full. I think it must be a setting on the inverter. Please show me in the right direction.

I have a simmilar problem. I have a Kodak 3kw inverter, a 24v system connected to two Revov 200ah batteries. The system was installed in my previous home. It was in storage for about 4 months, now installed in my new home. The BMS app shows that both my batteries only charges ip to 80% full. The inverter shows batteries are 100%. I rather believe the bms app that says 80%. Where must i start looking to fix my problem? Sorry for highjacking your post.

I also downloaded the app for the batteries. And according to that my batteris are 100%

When the inverter is connected to the mains, the app shows battery 100%. When i switch of the plug, the app shows the battery is at 80%., now even lower at 72%.is there maybe a charging problem? Do i need to change any settings on he inverter?

The inverter was connected to the mains all the time. It is connected to a normal wall plug.

Good afternoon everyone. I have been surfing this forum for a few weeks now. I decided to go for a load shed kit which i purchased online. I istalled the batteries(2x200ah revov) and Kodak 3kw Inverter temporary just to see if its running okay. I will do a propper installation running to the house DB but will first obtain more info regarding this from you guys. It been running now for almost 24 hours. I downloded the watchpower app also, and when i first switched the unit on. It said my batteries are 100%. Now after a day, with no load on the inverter, my batteries are on 80%. Surely something is major wrong here. Where do i start? What did i do wrong? I attach a sreenshot of the app, and photos of my installation.