add1c7ed55

Thanks

Now i have 92.05 patched by u. I can flash this right ?

72.66 is more stable but not solved the 90v problem. If u can modify is super. With 250v for twice mppts. Thanks.

I installed it and it works ok...but i think that part with 0.5A is not present, can verify? It seems morr stable, find the mppt very fast, and remains there all day, but the.mppt start a.little slow, can verifiy to be like 92.05 that u modify?

Now u can try, u have the old firmware.

U have 72.66 oem firmware for 8kw non twin 28066, that works with arenaflash tool...can make the patch for it ? I can test it immediatly

If this works, u can make the fix for the firmwares u made for 8kw axpert ?

Can u put here this version without 90v bug pls ?

Ok. Thanks. I will remind u after some time. Good luck in your work.

Can u pls modify the original firmware? We are a lot of people with this inverter here...thanks

How i can command QGMN on Easun 8kw? I want to see what s in the back

And do u think will solve the 90 v problem ?

Hi Coulomb, i want to buy an Axpert Max I 8kw Twin, under ANENJI brand, i searched and is made by Voltronic like mpp, easun, do u have firmware for this inverter ?

Which is the site ? There are a lot of Easun sites.

Sure. When u will have time only.

Hi. Do u think its hard to modify the new oem firmware 72.66 for 8k inverter ? I mean the patch that u made for 92.05. cause all we have eprom error with 92.05 and 92.09 and it calculates with errors the measurements for production, load...etc. The oem72.66.didnt give eprom fault. Probably is stable but have that floating problem. thanks

The new oem version 72.66 doesnt give eprom error, but need to be patched if @Coulomb have time to do it.

http://ftps.voltronic.com.tw/E/Easunpower-93CB312922AC474787C6/ Take it from voltronic server.

The single better thing is that this 72.66 is oem, and the inverter dont gives the eeprom error. In rest, the same problems .

Today i tested again the 72.66, but on cloudy weather seems to be worst than patched firnware pf Coulomb...i flashed again the 300v patch.

In the good sense. I mean its better.

When have time, can check the parameters of the new firmware? Maybe must be modified a little ..dont know...u are the master 😛

At 06.41 have started mppt, with 75v and in 10 minutes went in 350v and 0.3A, it seems very optimized, the production on clouds seems to be bugger. Eeprom alarm dissapeard. Since now all is like must be all the time.

Flashed. All ok. I connected the help connecter too. Tomorrow will see how works.