JayLie

I'm so used to my old shoto battery that was always on 100% SOC and all cells was perfectly balanced!! ...This "Battery Monitor" tool is actually awesome but powerfull!! it pulls the log directly from the battery, you have to first set the time right tho under Calibrate or else the times on the log will make no sense!, the bms is like a computer itself! its awesome, the problem I have with the shoto 5.12kw is that it cutt off at 98% and it seems to just leave the cells unbalanced.. I've had some cells 3.7v max, 3.3v min and nothing seems to wanna balance. EDIT: and when it goes to float, is discharges everything by -0.50A until it reaches float voltage of about 54v, and then you still have unbalanced cells, as everything is below 3.5v then... eish

Yea, your 90% Parameter 81 is 'Cycle Cumulative Capacity' makes sense, but I'll leave it on 20% just or warrantee purposes, I can't seem to get them higher then 98% SOC, I disabled the function switch called 'Intermittent Charging Function' and parameter 80 'Interval Charge Capacity' which is at 96% by default. can't be changed to 100%, the highest it will go is 99.9%, but the batts doesn't want to reach 100% SOC.... it stays @ around 98% SOC min

This has been very insightful, awesome! ....I checked the "history record" and aha!!! 100%, how do you turn this option off so that it will stay at 100% SOC just out of curiosity? and 20% cumulative discharge seems a bit messed up, what should you recommend that gets changed to?

Pack1 and Pack2, with charging parameters of 56.4v bulk/54v float

I've got soo many questions and concerns actually, I bought 2 of those shoto 5.12kwh and a couple of days apart and linked them up in parallel, the first one have 10 cycles and second one have 5 cycles, but the first battery says Total capacity: 103.05 Ah and the second battery says, 100 Ah, how does that work?, does the BMS learn with time or what? and with the bms software, it looks messy, just warnings and red batteries mostly, and the SOC is about 98% max, I'm going to add a picture of my previous shoto battery and everything looks perfect!! Shoto SDA10-48100L5 4,8kW

I wonder if anyone have the perfect charging and float voltages for me, I'm using a Axpert inverter, and Shoto SDA10-48100 Lithium Battery 5.1kWh (16cell) battery

Wooow, that did the trick!!! .....thx man!

I also though it might be a .net framework issue, but when I tried to install .net framework, my win10 tell me I already have the newest version.

I've tried that already before posting my message here, it doesnt fix the problem

Hi Guys, Battery Monitor V2.1.8 or Battery Monitor V2.1.9 doesnt wanna work on my win10 pc, It only works on my win7 laptop, does anyone else have this problem?, On my win10 pc, it starts up with nothing loaded, and then I want to import a protocol and get a nasty error?! on my win7 laptop, I just fire the program up and everything is sorted, I just connect, no issues!

Deleted