usr023

Try this: 61.03+22.21

I tried it now. 61.65+39.16=error 32 I just tried this. 61.03+22.21=WORKING.

Thanks for sharing.I just updated the 61.65+22.21. It started, it didn't show any errors, but it needs to be tested.We'll see...

I don't have 61.01. This version was included when I bought the inverter. I just updated the 61.03+22.21. It started, it didn't show any errors, but it needs to be tested.

61.01 with 22.20 is OK

The firmware (Remote Panel_Reflash_MCU(22.20).rar) working 100%! I tested it on my own inverter!

There is only one phase. But I can also use a 3-phase drive motor with a VFD. I will also try the flywheel. I don't want free electricity, as you can see in many youtube videos, which I don't think works. The goal would be to produce the highest possible power with the lowest possible energy (500W-1KW max.)I think there is a chance for that. Anyway, there is another servo motor of the same type, which is 12KW.

Motor: 1410rpm, 550W, 230V 3100rpm-240VDC driven pulley size is: 80mm drive pully size is: 180mm 4750rpm-340VDC driven pulley size is: 80mm drive pully size is: 270mm PM generator/servo motor: 5.5Kw, 3phase I don't want to ruin the inverter, so I have to figure out how to do it first. If at all possible.

I have a 5.5Kw 3 phase stepper motor driven by a 1410rpm 230V 550W motor at 3000rpm (4750 rpm). 3-phase rectifier bridge + 15,000uF capacitor. This is how you get 240VDC 3000rpm or 330VDC 4750rpm. If I were to connect this to a 5600W solar inverter (e.g. Axpert VM4) (120V-450V). Would it work?

Remote Panel_Reflash_MCU(22.20).rarFirmware - MCU-22.20 - Voltronic Axpert VM4 5600W. Tested! Working!

Hello. Can anyone help with exactly where to set the DoD in the inverter(Axpert VM4 5600W)?