educorner

@Beat that is what i was thinking too but seems not to be true. The voltage is set to 47V but it happens also at 49.8 V. Lithium batteries doesn't have that voltage drop so I don't know why that happens...

Hi all, I have an older voltrinic tri-MPPT running firmware 75.31a connected to 2x pylontech 5000, PF is 0.8 I notice that when the load goes over 2000Watt the inverter is going from battery mode to line mode. I use solarassistant as software, batteries are charged when electricity is cheap and with solar off course. I can't find any setting to set the discharge current, also tried with watchpower or the settings on the display. Is there any way to change the behaviour? Even with full battery it goes to grid all the time.... The load should be going to 4000 Watt.

How do you access SSH ? Running beta but have no option under Configure -> Configure Local Access Can someone post a screen shot ?

which you good luck with the repair! Let us know if you succeed

Can someone explain what the function "feeding grid power calibration" (standard 0 watt) exactly does (SolarPower software) ?

don't know, if I switch off the AC input surge, I don't see more of less power consumption on the software. The 6 Kwatt is messured with the official grid counter. I also have, on an other location, the axpert 5000 (other oem, but same device). This one only consumes 1,3 Kwatt in 21 days which I think is very acceptable (the grid should be able to take over when it's cloudy -> which hasn't been the case last month), but 6 Kw/day is unacceptable. If they can't fix it with a firmware update I will put a relay between the input. The software isn't that difficult to do something with the RS232 port. I will inform you when I have more information on this subject.

I have an infini 10 KW and I have send the question to a service center. This is around 6 Kw / day and unacceptable.