BdJ

The Li BMS screen, it seems the SOC and SOH is now close and doesn't overlap with the Discharge current

Requested my 5kw to be upgraded, yesterday around the 2pm mark, all power was cut in the house. However the inverter was still kicking, noticed the "On" turning into B and started counting. It was updated to 3.3.8.2, will test and play with the screens. Not sure what was changed yet

They've updated mine yesterday, it's on 3.3.8.2

Who'd be able to check if my Inverter has a firmware upgrade available? or do I email Sunsynk

Did you use the cables it came with? Or those set of special extra RJ45's

See mine keeps a 20-60 W constant feed? Which feels strange, or I don't understand these Hybrid inverters yet. Coming from an Axpert type inverter, still loads to learn

Highly appreciate this feedback So keep the volts the same, across Float, Absorb, and Equaliz, gothca. Battery setup can go lower, will amend as per your suggestion. 10, 15, 20%

Now it's back at 100% Seems the Sunsynk and Hubble have some issues talking to each other?

Interesting! Thank you for the insight

Received feedback from Hubble support, they want me to buy the Cloudlink. This apparently resolves this issue.. My pain with that is, I need to pay R3000-3500 for something that's my problem haha.

Well it’s not 96% anymore, neither is it 100%

I see yours shows no power drawn, mine keeps a 40-60w power draw going, even when fully charged The unit is a week old, so not quite sure if it’s the cells trying to balance still? Edit, how are you getting the cycles output, or is that only for certain wifi dongle’s and apps. I’ve got the sunsynk wifi adapter

Thanks! I’ll quickly set it and monitor the outcome

Now, sadly, i'm only seeing a 96% SOC. I've reset the battery and inverter, no success.

Thanks for tagging. Started noticing a new trend, might be the battery or wrong information given from the inverter. The battery is only charging to 99%, last few charges, it only reached 97%.