janek

Hi Ham, thnx for the reply. my panels are Longi - Lr5-66hph-510m VOC - 45.85 Vmp - 38.68 Imp - 13.19A Isc - 14.05A Pmax - 510w i thought that if i connect the 3rd string to the MPPT1 together with the 1st string, then the power generated would just add up, same as if the panels were 9S2P connected on the roof somewhere. And eventhough it would be different orientation, then it should hurt as much if one string is producing less, it would just add less generated power to the MPPT1 input. Or is my understanding wrong? Also, would it be possible to have different number of panels for each string going into the MPPT1 inputs? same panels specs but different qty. i can fit more than 9 panels on the Northeast side . Would that be a problem? Guys at Deye told me they must be same specs panels and same qty for each string going into the MPPT1 connectors. I would think the two separate inputs on the MPPT1 are just like some sort of a combiner box. or am i wrong again? would use of a diode solve anything ? the Deye guys suggested to have a diode on each of the two strings going into MPPT1. thanks for your help guys.

Hi jaxone, we're you able to figure out the best setup for the 3rd pv string? I have similar issue. I have panels on southeast side and 13 on southwest side, each goes into separate mppt input on the deye. However im not sure how to add 3rd string w maybe 10 panels on the northeast side. Im not expecting much from this 3rd string but maybe some ambient power generation could add to the overall output. But im not sure if the northeast 3rd string will bog down the other strings. Any ideas how to do it ideally? 🤔 😁 Thanks for any input on this. JD

Hi Slipx, yes, i have pasted it into the config.yaml file - as per some viedo on youtube. i guess not right, huh. i have installed HACS and have installed your sunsynk powerflow card, i have the deye inverter which im reading data from via the solarman integration. all of this is working fine. just dont know how to set up your card and get it functioning. right now i have the card, but with no data. so i hope you can help me through. sorry for such newbie questions, but i would really love to get this working. once its up and running, i think i can slowly tinker with it and figure out how the card yaml works and which things i can modify to best suit my needs. just need to get it working thanks for your help man.

Hi Slipx, thanks for the info, however when i copied the Solarman text into the configuration.yaml file i got several errors and im not sure where the problem can be. like i said, im a novice in terms of doing things in yaml, so its kinda hard for me to do this. any help is greatly appreciated. i dont know if i have to add something else into some other file or what. sorry this is the error i get when checking the yaml configuration.: Integration error: type - Integration 'type' not found. Integration error: entities - Integration 'entities' not found. Integration error: solar - Integration 'solar' not found. Integration error: sensors - Integration 'sensors' not found. Integration error: cardstyle - Integration 'cardstyle' not found. Integration error: show_solar - Integration 'show_solar' not found. Integration error: panel_mode - Integration 'panel_mode' not found. Integration error: grid - Integration 'grid' not found. Integration error: load - Integration 'load' not found. Integration error: battery - Integration 'battery' not found.

hello, i wonder if this will work with the solarman integration for Deye inverters. can anyone tell me if it can be configured to use the solarman entities to be the sensors for this energy card? would anyone be willing to help me remotely set this up on my HA with the solarman entities? im not so good with coding and making changes like this. so im willing to pay for such service thanks for any help or info.