Leonardus

So if there is an imbalance between L and N the RCD will trip irrespective of an E being wired?

Volta BMS is supposed to cut off discharge at 44.8 V. That’s below 10%.

All four indicators on the Volta battery were on. They didn’t reduce as they would when the battery is draining. After 2 days they all went out at the same time and the battery was empty! So problem must be with the battery or BMS. Can’t check comms or BMS with an empty battery. Anyone have any ideas?

Installed Dye with Volta Stage 1 battery, no panels. It initially charged to 100%. Then it kept charging at about 0.03 Kw and battery kept showing 100%. 2 days later the battery went dead at 51.9 Volts = 30% with grid power on. So obviously wasn’t charging. Firstly why did it show 100% and then went dead and secondly how can I wake the battery up again and recharge. Help would be much appreciated.