mervinpearce
Members
-
Joined
-
Last visited
-
-
-
-
Thanks, will do.
-
-
It does seem that it says it needs to go in for repairs... any place in Gauteng that I can take it to for repairs? thanks
-
Where can I Post this question? I have a few things to be done such as redo main DB and connect solar to a phase (I have 3-phase) Or should I just walk up to a local guy? Problem is mine I really liked and was good but joined the exodus of SA
-
I am on the eastrand and looking for these to replace my current batteries. Anyone in stock?
-
I want to replace geysers that are on a flat roof on the outside. As I have never done this, any pointers or trusted installers that can just come and do it for me? Also, looking at a small unit for a kitchen for normal dish washing... Thanks.
-
My usage for the last 6 months before just taking some off the main supply. Running mostly solar on some of my home. solar geysers are next. Green is start with solar.
-
-
Here we go
-
Thank you, all connected and running, just waiting for my trial key. Just wanted to make sure.
-
I just watched a video on YouTube recommending a grid-tied inverter connected to the grid and feeding into my Axpert (I have a 5kVA unit) It seem logical and would like to ask those with experience to chip in and if it is true which are locally recommended?
-
Using an Axpert how would I connect the Raspberry Pi? Trying to look for ReadMeFirst or other documentation on the site and I am flying blind. Thank you.
-
Herman, keen on the 2 batteries, sent a PM
-
-
I will measure with a glass ball to check the burn pattern
-
-
http://solarelectricityhandbook.com/solar-angle-calculator.html
-
thank you I see the tilt calculator here in SA (East rand) says 88 degrees at the moment
-
-
-
-
-
I have 15 x JA Solar 265W panel and have connected 12 only so far There is a Voltage Open Circuit (VoC) of 37.95V and VMPP of 30.92V I have an Axpert 5kVA which has a maximum VoC of 145Vdc Am I correct to say no more than 3 in series per array? With the spec only use 12 or possible to use all 15 (5 arrays of 3 panels each) as the inverter will limit 3000W input? Many thanks
