Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Steven W

Members
  • Joined

  • Last visited

Everything posted by Steven W

  1. Hi I am considering to add a second pv array. My interpretation of SANS 10142 it is fine to have one combiner box for two arrays with separate circuit breakers and surge protection. Is my interpretation correct?
  2. I have 6 used Canadian 405W solar panels for sale. Reason for selling is that I bought Artsolar 455W panels which can't be installed with existing due to mismatch characteristics. I am looking at R2000 per panel. The panels have been installed in July 2019. Looking for R2000 per panel. Location: Centurion Contact: Steven @ 0814287179
  3. Have a Hagar SF263. Got mine from livecopper.co.za which offers free shipping over R350.
  4. Hi. Anybody used standard server cabinet for their Pylontech because the standard cabinet is 450mm deep versus the Pylon cabinet which is 500mm? Regards Steven
  5. Hi I am busy with my solar solution investigation and have some initial questions. Location: I busy looking at the location of the inverter and batteries, but have a number of challenges and want to get some ideas from the group. My main db board is located in hallway and full, so installation of inverter and batteries very close to db board not an option. I have a small storage room (2 m x 2 m) to the main db board where I have server cabinet installed where my fiber ONT, modem, micro server, DVR is located. I can potentially install the inverter, batteries, etc. in that room and run cables (+/- 6 meters) to main db. The only concern is not much ventilation so one might need to install extraction fans, etc. On the plus side, the room above room north facing. Then I have second db in the garage to provide power to loft build above the garage. The db in garage gets power feed from main db. The second option is to install inverter, batteries, etc. in garage close to second db and run cable back from inverter to main db which to connect. The only challenge, because their is a loft above the garage the roof is quite high and also east and west facing. With regards to batteries, any issues with installing it in the home? What needs to be taken in consideration when selecting installation area? Would the storage room be sufficient or is garage recommended? Hybrid vs Offgrid I am considering hybrid solution. I read that with hybrid solution one needs to take regulation in consideration. I am in Centurion I can't find much on solar regulation. With regards to regulation, is the concern related to pushing power back into the grid? If the case, can't one set the inverter not send power back into the grid? I notice there is a number of "hybrid" inverters which basically switch the source from solar to grid if power from solar is not enough. I am looking for a hybrid inverter that won't switch source but combine sources. For example, "The first use the solar power, if the demand exceeds the solar power it will supplement it with mains utility power. If the solar power exceeds the power demand the excess power is used to charge batteries." Any recommendations for 3kVA and k5VA hybrid inverters? Thanks Steven

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.