Jump to content

MO.

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

MO.'s Achievements

  1. This was right on the money - CT incorrectly connected, not in proper orientation Thanks to GreenMan and Bobster for the recommendations
  2. I have emailed them ... This does not seem to be a problem specifically with the inverter, but rather with the way the DB has been wired. In November, I had to install a new DB due to space constraints, and the addition of a few more circuit breakers - Since that time, I have an issue where the Loads that are not on Backup keep drawing electricity from Grid, regardless of how much the PV is generating. What will happen is my PV will go to Max generation, and in addition to that I will draw the actual load of the appliance/geyser from Grid The installer that did the original installation was great, but their aftersales and support has been really poor - They are unwilling to help
  3. Please can some esteemed members of the forum, suggest electricians in Johannesburg familiar with Goodwe ? Unfortunately I have been chasing my own tail since November, with Phantom power draw and issues surrounding my PV - Just need someone who understands the Inverter and who can do some fault finding on my DB. Its quite urgent
  4. Hi There, I am a newbie, and have a similar question / ask to that of Niel's above ... My current system is Goodwe 5048 ES with 2 arrays of 5 x Canadian Solar 330 w panels each, with 3 x 2.4kwh Pylontech batteries as the power store. Installed this in end 2018, and have been pretty impressed. I am looking at scaling this system, by the addition of a further 5 x 360 w panels. Any references for installers interested in this kind of 'small' installation in the Johannesburg area ? Also my current panels are Poly, I see there are some good deals to be had on other brand Mono panels ... Is it possible or dangerous to mix both Poly and Mono panels in an array ?
×
×
  • Create New...