Neilmoo

Good day, does anyone have damaged US2000/US3000 for spares. I am looking for teh SOC light board, as mine are fading. Please DM me if you have any ?

Good afternoon all, I have 4 US2000B that have had some damage with lightning / surge issues. Currently I need to replace the PMU, and while I'm at it, the plan is to replace the CMU as well. QUESTION: can i use the new PMU/CMU that is used in the 2000C/3000C/5000 or do i have to replace it with the individuals PMU / CMU that is the standard part numbers for the US2000B.

Good day, my kodak king display is not working, and it is also not sending data to my Pi for Solar assistant (absolutely no readings on solar assistant). I read a previous post that says the firmware needs to be updated. can someone guide to to the right firmware version please . many thanx

Good morning all. I'm new to the forum so please forgive me if i am using the wrong section to post this specific thread. My electrician installed two Phocos inverters this weekend. Currently the setup is as follows: - inverter 1 with canadian 365w panels (2 strings of 6 each) - inverter 2 with no panels currently (but will have 7 canadian 365w, connected this weekend) At the moment, the 1 inverter is generating power from the 12 panels and exporting to the grid. When I turn on the output to supply the house, the inverter goes into a F52 error (internal bus voltage is too low). According to the manual, it says i must return to repairer, if the problem persists after restarting. is the problem my setup, or has anyone experienced such issues before? Any assistance or advice would be appreciated