Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Greenrich up5000 - anyone used or have any knowledge on this?

Featured Replies

Hi All,

Been quoted on the above battery for my solar install. Reading through the forums however, this does not seem like a very popular brand so it is slightly concerning. has anyone ever used these or know of these bats? apparently rated at 1.5C but i cant find much info or reviews. thanks in advance for any insights.

  • 1 month later...
  • Author
Just now, JPNiemand said:

@ZCSdo you have any idea how to view cycle count? Also got one and that only info I would love to see. 

 

Unfortunately not bud. 

  • 3 months later...

I installed a Luxpower SNA5000 5kw inverter and Greenrich UP5000 100ah 4.96kw battery (No Solar) in November 2022 and are experiencing issues. (Jan2023)

1) Inverter is only reporting a 50ah battery instead of 100ah. I have seen this to be a common issue with Luxpower on forums

My inverter has the newer BMS cable setup that uses a standard ethernet pinout for comms.

my battery brand is set to number 2 (seems to be OK with comms as it is reporting SOC%)

2) I get major voltage drop below 60% SOC 

I have set voltage cut-off at 44V because at low SOC the voltage just drops to 0

3) Practically- with average consumption of 300w during the night, I might reach 4 hours during load shedding but as soon as I even briefly consume over 1Kw, the battery dies before 2 hours.

Is this a setting issue or is it a bad battery?

Screenshot 2023-01-19 095342.jpg

Screenshot 2023-01-19 095008.jpg

Screenshot 2023-01-19 095127.jpg

  • 2 weeks later...
On 2022/09/14 at 9:58 AM, JamesF said:

Hi, 

I use this exact UP5000 battery and it is great! Well made and perfect use. 

DOD 95%

Good luck!

@JamesF, wanted to ask how long you've been using the Greenrich battery and if you're still happy?

@JanPKotze Sounds like a faulty battery, however, what is your DIP switch set to? If you only have 1 battery, then only DIP 1 should be up? (1000) Or all DIPs down to represent master.

If you have more than 1 battery, the second battery would be set to 0100. This allows the UPS and the battery BMS to communicate correctly and balance load, charge ect.. (Only applicable if you have more than 1 battery in parallel)

 

Edited by JamesF

  • 2 weeks later...
On 2023/01/19 at 9:55 AM, JanPKotze said:

I installed a Luxpower SNA5000 5kw inverter and Greenrich UP5000 100ah 4.96kw battery (No Solar) in November 2022 and are experiencing issues. (Jan2023)

1) Inverter is only reporting a 50ah battery instead of 100ah. I have seen this to be a common issue with Luxpower on forums

My inverter has the newer BMS cable setup that uses a standard ethernet pinout for comms.

my battery brand is set to number 2 (seems to be OK with comms as it is reporting SOC%)

2) I get major voltage drop below 60% SOC 

I have set voltage cut-off at 44V because at low SOC the voltage just drops to 0

3) Practically- with average consumption of 300w during the night, I might reach 4 hours during load shedding but as soon as I even briefly consume over 1Kw, the battery dies before 2 hours.

Is this a setting issue or is it a bad battery?

Screenshot 2023-01-19 095342.jpg

Screenshot 2023-01-19 095008.jpg

Screenshot 2023-01-19 095127.jpg

HI, this is display problem caused by communication between LUX inverter and BMS. you can upgrade the BMS firmware to solve the problem. but if you don't upgrade, it is NOT effect the performance of battery and inverter.

  • 3 weeks later...
  • 2 months later...
On 2023/01/28 at 10:54 AM, JamesF said:

I use a Greenrich UP5000 battery with solar on the SunSynk 5.5Kva inverter.

Very good battery, no issues at all. Installed in August 2022.

"2C" discharge means that the unit can produce "twice its rated current over time". 

The Greenwich is a 5Kwh Battery. At 1C, it could produce 5000w for 1 hour, or 500w for 10 hours, ect..

At 2C, the battery can produce 7500w (maximum rated) for 30min.

Also, keep in mind that your inverter will need to handle 7500w for that to make any realistic impact. Checking the specs of your Growat inverter, it can only handle 7500w for 5s before overload, so no need to worry about the battery.

Good Morning

I have a Five Star 5kva inverter with 4 x 450 panels and a 5kw battery. I would like to add another batttery and 4 more panels. I cannot find any Five Star 5k batteries anywhere.

1. Can I add another brand battery that will not do any damage? same size 5k. Still using the same 5k inverter?
2. Can I add the same Five star brand but a bigger battery, still using the same inverter. This is combining the 2, 5k and 7k.
3. Do I need to change the inverter to a bigger size to accommodate a bigger battery

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.