December 11, 20187 yr I recently adjusted my Inverter to OSO charging of the batteries. I got advice to also revisit the 'battery bulk voltage' as well to avoid damaging the batteries. i checked through the manual but am not 100% sure which setting/s to update and to what. Any suggestions?
December 12, 20187 yr Battery bulk voltage will be determined by you batteries' datasheet rather than the Axpert manual.
December 13, 20187 yr Author On 2018/12/11 at 1:41 PM, Fritz said: check the manual again... it is in there. What type of batteries do you have? that specific phrase is not mentioned in the batter. Parameter 26 refers to 'bulk charging voltage' ; parameter 27 refers to 'floating charging voltage' and parameter 29 refers to 'low DC cut-off voltage. Currently 26 = 56.4v ; 27=54v and 29=42v. Is it one/some/all of these I need to revisit due to the OSO charging selection? In terms of the batteries I have: 4 x 100ah Vision batteries
December 13, 20187 yr 1 hour ago, Radar said: Vision batteries Get their specs (manual), they should have the required settings in there for you.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.