October 28, 20241 yr Hello, I need help with the inverter. This morning around 4:00 it stopped communicating and says error 32 I charged the batteries from the network. Unfortunately it happened 4 months after the warranty so I opened it and found that 2 things were burned on the board. Please advise where I could get a whole new board or a wiring diagram for the board and what actually went wrong. Thanks for all the info
October 28, 20241 yr 4 hours ago, megaman said: Hello, I need help with the inverter. This morning around 4:00 it stopped communicating and says error 32 I charged the batteries from the network. Unfortunately it happened 4 months after the warranty so I opened it and found that 2 things were burned on the board. Please advise where I could get a whole new board or a wiring diagram for the board and what actually went wrong. Thanks for all the info https://leroymerlin.co.za/catalog/product/view/id/332251 https://segensolar.co.za/product/kodak-spare-parts/storage-systems-kodak-spare-parts/maintenance-storage-systems-kodak-spare-parts/kodak-remote-comm-board-for-og-10/ Edited October 28, 20241 yr by Derek3
October 28, 20241 yr They call these "remote comm boards" but I think that these are the equivalent of the board in the removable displays. The displays do handle comms, including BMS comms, as well as just driving the displays. I'm not aware of any schematics for these, but I suspect that they are similar in broad function. The main difference is that the round displays are effectively three displays in one, so the part of the circuit that controls the display would be tripled. It probably also controls the programmable LEDs. But there is no schematic for the removable displays either, that I'm aware of.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.