I recently built my own combiner box using an external DB box and Neutral bars as Busbars. I am not happy with it and plan to redo it using the following box and Busbars.

Any suggestions on an adequate box is welcome.

 

a small plastic distribution box?

 

https://www.takealot.com/sqi-8-way-db-board-surface-din/PLID54859350?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3sAsGbj7SpqncCZV_9UO5N4Ezmmz3sQ68jprStTfNa1Df3-YGfukrMaAhxwEALw_wcB&gclsrc=aw.ds (link just for picture reference)

That would be perfect if the cover screwed on closer to the front. I did have a look at these type of boxes but unfortunately most of the covers seat near the back, leaving very little room to put through the cabling, plugs etc.

Thanks for the tip though.

Edited September 24, 20196 yr by GVC

20 hours ago, GVC said:

That would be perfect if the cover screwed on closer to the front. I did have a look at these type of boxes but unfortunately most of the covers seat near the back, leaving very little room to put through the cabling, plugs etc.

Thanks for the tip though.

so more like this?

https://www.takealot.com/sqi-9-way-db-board-surface-din/PLID54859351?gclid=Cj0KCQjw_absBRD1ARIsAO4_D3utTKGCj2Ci9A6O3fhhHFPgD6hFVQY5Q92X5fO8vM3Bx5Hton_PFOcaAiM7EALw_wcB&gclsrc=aw.ds

 

looks like it has dedicated gland spacing.

Thank you @Dex_  That will work perfectly. I will place an order tonight.

Much appreciated.