Bamba

I have stock of the 15kwh https://www.felicitysolar.com/48-volt-300ah-lithium-ion-phosphate-battery-aa-rechargeable-lithium-power-batteries_p108.html, Only two left and going for R65k

+-R40k

No software needed, I only had to make(crimp) a custom cable that connects the to the inverter. pin 5 and 6 on the battery side, and pin 1 and 2 on the inviter(Deye)

The shopping experiences was good, I didn't have any hiccup's. I contacted the support now to get information on making the LBPF48300 communicate with my inviter, which they responded within 24hours, and now the inviter and the LBPF48300 are communicating. Regarding capacity, it is for sure bigger than the 10kwh(Felicity, which was fully around 13H00 - 14H00) and they are for sure bigger that the 7kwh of Pylontech's I had(they used to be full by 12PM) my solar array is very small at 4 x 595w not enough to fill the battery, today it went from 25% to 75% on full sunlight.

I got bought it directly from them. I'm running without communication between the battery and Inviter. I'm using a Deye inviter, and its able to determine the SOC based on the voltages, my settings below: If you see below it is able to determine the SOC, please not i have a setting to top up the battery if not 100% between 6PM and 7PM:

I have been using the "LPBF48200-M" https://www.felicitysolar.com/lifepo4-48v-200-amp-lithium-ion-power-battery-pack-with-bms-for-inverter_p105.html for the past year, no issues besides the communication, I just set the voltages on my inviter. I just received LPBF48300 this week, I will plug it in soon and test that.

You would need to create a cable, I had to crimp a cable for my US3000C with Axpert inverter

Have you tried this? I'm also having the same issue