Pierre

Tx Mauritius, I tried that cable also, that is the standard Axpert King cable that came with Dyness Battery. Then I tried the a CAN cable, the one I made up. Axpert VM IV 5.6 pin layout on top and Dyness BX51100 at the bottom.

Made a cable connecting Bat>Inv 4>6 and 5>7. Tried all settings on the inverter. Then tried the Axpert King cable that came with the battery also no luck. Dip switch on Dyness { 0 1 0 0 } Any help.

I have been using Sonoff devices for a long time now but wanted to do some security Automations but the ewelink app was unable to change the colour of the lights activated by motion sensors. Unable to buy a pi4 for for Home Assistant due to no stock I started using HomeKit on my Apple TV. Got a old pi3 from a friend and running homebrige on it I started using Homekit. Although Homekit’s automation is a bit limiting Siri makes up for it. Most useful automations. All iphones can activate alarm and panic button. Outside zones has its own colour, motion outside change colour of colour lamps in my house. I have a open green area at back of my home and now I know when someone get to close to my fence or if they already jumped the fence. Best automation, I have an old Ethereum mine that only runs during daytime from solar. Homekit only starts it if battery is above 50% and cloud cover is less than 51%. Also checking every hour if cloud cover changed to switch it on or off. Battery Current, Voltage and Soc runnning as temperature and humidity on homekit.

Hi Where do I find the battery cycles? CCGX has no history. Pylontech US3000 x 4 SOH 96% after 2.5 year of grid. Thanks

How is you system doing now?

Does this mean I can't use these inverters with a prepaid meter.

Thanks Superdiy What will happen to this excess power. Can is send it somewhere like, geyser of water pump.

Using the Imeon of Infini look like a great idea for doing solar DIY, but if you have a prepaid meter can these inverters be programmed not to supply to the grid when batts are full.