Matthys Koch

Mine is working fine this morning. Rarely have issues with the app

Hi Ryan, I have a 12L Dewhot geyser, and a 19kg lasts about 6 weeks. The gas geyser only supplies the bathroom, and the distance to the bathroom from the geyser is probably a meter. I had a leak in one of the gas pipes at one stage and lost a whole bottle within two weeks... Seems to me you might have a leak somewhere. Just a side note. Make sure that you have the correct size regulator attached. Might also cause problems

That is correct... Did mine three months ago...hahaha

I am a bit confused... my Hubble AM2 was installed mid December last year. I checked the Voltages when I saw the threads with the SOC probelems. I asked my installer why my settings differ from the Hubble website. He said that the BMS configures those voltages. My current Voltages are as follows: Float V: 55.2V Absorption V: 57.6V Equalization V: 57.6V Discharge Amps: 120A State of charge has been stable since first installed and the SOH is also still at 100%, so I hope it stays there! Sorry if this is a bit of a hijack... Regards, Matthys

Might be something, might be nothing....I see on my Sunsynk Batt Charge Screen that the Grid signal box is ticked... Not sure what the function is, but might be worth ticking?

Aaaa, makes sense! Thanks for the reply!

Good day all, Firstly thank you to the admins for accepting me! I have been reading the wealth of information available on this forum for a few months now. I got my 5kw Sunsynk system installed on the 15th of December 2022(5kw Sunsynk Inverter, 5.5kw Hubble AM-2 and 8x 450Watt Canadian Solar, Panels) I am very happy with the system and can already see the savings! Now my question... Even with double the amount of solar production than the load and the battery is fully charged, I am still pulling on average 20watt from the grid. Is there a setting to check or is this normal? Thanks in advance!! Matthys