George

Thanks. After resetting a few times the problem was resolved.

This morning i switched off everything. Tried the 3td inverter again and it took the PAL setting. Switched back on and so far everything is working normal. Thanks for the guidance and info. Regards.

Thanks Chris. Will try that.

Thanks Ibiza. Will try it tomorrow and report back.

Checked it. Voltage is exactly the same as the other two. Cabling is secured. Also checked the settings. All settings are the same except for 28. Inverter 1 =PAL. inverter 2=PAL and inverter 3= S1G. But inverter 3 does not adjust nr 28. So it seems like it reads inverter 1 as the master.

I connected 3 x 5kva Mecer inverters in parallel. My problem is that one inverter doesnt show "slave". The voltage on that one is also different from the other two inverters. One shows master and one shows slave but the other one doesnt show anything in the centre of the screen. They are connected as described in the manual. Any sugestions where to start?

Thanks

I have 3 Axpert ( Mecer) 5kva inverters. I want to know if it is possible to connrct each inverter to its own battery pack while the inverters are connected in parallel? My reason for asking, i have 8x 180ah batteries and 4x 200ah batteries. So if possible, i would want to use 4 batteries per inverter in stead of mixing batteries. I have got 20x 150watt panels available for the 3 inverters. Currently the inverters are used as 3 different setups. But i want to combine the 3 in parallel. Thanks. George

Good day, i need some help with my Axpert ( mecer) 5kva inverters please. The change over between escom and panels or batteries has become slow. So much so that the lights switch on and of during change overs. I read that the inverters can be updated, but no idea how to do it. I have got a serial cable and Watchpower on my laptop. Thanks George

Thanks

Thanks for all the info. Will shop around. The Efergy monitor working with Ethernet sounds nice, but I use a telkom wifi router. So will have a look at my options. I want to measure consumption on at least 4 places.

Thanks

Good day, i would like to measure my electricity consumption on different places at home sumiltanious. For Ex escom mains in. Escom in to inverter, supply to my outbuildings, supply to my flat. What is available with clamp on pickups? I also once read that someone used a laptop with dongle to do something similar? With technology today i am sure someone out there has a system worth looking at. Any ideas please.

Thanks for the explanation

Thanks Chris, appreciate your help