Shai
Members
-
Joined
-
Last visited
-
Shai reacted to a post in a topic:
Panel Count per MPPT on 5kW Sunsynk Hybrid Inverter — Best Practice?”
-
-
-
-
-
Shai reacted to a post in a topic:
Will this damage a Sunsync 5KW inverter? Your System running with 550W panels?
-
I am also using Geyser Wise and heat the water up to 75c using solar during the day. The water seems to still be hot enough for evening and morning shower.
-
Thank you , the problem i have is if you have a shower later in the morning and when the Solar geyser starts its day job, it dumps cooler water on the already warm/hot water. My idea of starting the the solar pump after 9am in the morning should alleviate this issue or set the differential much higher than the limit it has.
-
-
Is there any way to set the differential temp higher than the set 7c to 15c or have the pump start at around 9am as i do have have an issue with this during winter when the pump starts early cooling the already heated water in the morning. I am currently using home assistant but cannot find a way to control this.
-
-
-
Hi all Did anyone successfully integrate and manage to upload their PV data to PVoutput using a Solarman dongle and homeassistant? I have searched but cannot find much info. You can monitor the production levels of other systems in your area and generate alerts based on comparative data. https://pvoutput.org/ regards Shai
-
-
yes , maximum today was 12.5Amps. I have decided to put the panels on 2 stings of 5 each.
-
i'm not sure the firmware however i think i will just split the string in two . I have checked on the sticker that it shows 13A per string
-
My mppt is not clipping at all, its maximum is 12.2a Would putting 5 panels on 2 strings still give me about 4.5K plus power ?
-
I have a Deye 5kv inverter with 9 x Jinko 555w panels on one string. The voltage with load is around 420v and I have another panel that i want to add on. The Voc on the panel is 49.72v which will still be below the 500v limit, it is safe to add another panel to this?
-
Hi all , i currently have the below issue with a Deye 5kw inverter showing my daily discharge as a total. How do i change this to daily?
-
Shai joined the community
-
Hi all i purchased a Deye 5kw inverter and currently looking just to subsidize my Eskom account. Batteries will be added at a later stage , i do have limited roof space and i am looking at 6x 540w Canadian Solar panels to start off with. will these panels be compatible ?