Furlongs

I am not sure if I am answering the or it's a question, I have the same issue, but little bit different. I have installed 0.37kw jojo pump getting water from the tank when no municipal water supply, and when municipal water is supplies, I get it from the main source(municipal) When there's municipal water, it works OK, but when the municipal water is not available, the pump will switch on/off regularly, I checked the leaks but got nothing, no leaks so far I am not sure how to remedy this, need assistance Thanks

Hallo all. My today's question is: 1. What can I choose between SPD(surge protector Divice) and Voltage protector (AVR). If I have to install protective device in my DB board and I have to choose only one, which one can I install first with the hope to get the other one later, I understand they perform different specific duties. Will it also be advisable to install them both? 2. Does the Automatic changeover switch has both SPD and AVR built in. Will it be advisable to use it replacing both SPD and AVR or it's just has the only duty to switch from normal grid to reserve power. Your inputs will be highly appreciated thanks

Hallo all. My today's question is: 1. What can I choose between SPD(surge protector Divice) and Voltage protector (AVR). If I have to install protective device in my DB board and I have to choose only one, which one can I install first with the hope to get the other one later, I understand they perform different specific duties. Will it also be advisable to install them both? 2. Does the Automatic changeover switch has both SPD and AVR built in. Will it be advisable to use it replacing both SPD and AVR or it's just has the only duty to switch from normal grid to reserve power. Your inputs will be highly appreciated thanks

Thanks a million This brought clear light in understand

ToHallo to all I red all the comments and it help me a lot, I had similar problem on which to use between USE and US2, since I set it to US2, I think all is well. I also need help to hope I will also get it I am using 3kva Growatt 24v inveter paired with 25.6v Esener. I can see the percentage of the Battery both from the inveter and the Battery (it does not have screen display). 1. How will I know(see) what is the percentage of the battery? 2. How will I know how much Battery percentage I have used, DOD? 3. Is the any method to know or to calculate it since it's not displayed both from the inveter and the Battery? Your inputs will be highly appreciated Thanks

Need Help. I want to know how i culculate the lithium battery percentage or DOD. Hw do i know how many percentage i used during loadshading. THIS MIGHT SEEMS UNRELATED I am using a 3kva 24v growatt inverter paired with 25.6v ESENER lithium battery. 1. The inveter does not displays battery percentage only volts. 2. The lithium battery does not have the screen where you can see or monitor the battery percentage For the above reasons, i am asking to be assisted to know or see how many percentage or DOD of the battery when in load. I hope this will be clear, any assistance will be appreciated Thanks

Hallo. So far according to your new settings(tests), how far it works, what's your most preferred bulk and float settings. I am still on 28.4v bulk and 27.3 float. Is there anything I can change or it's balanced? Thanks

Hallo all. 1. I need to know and understand what does a battery cycle ecxatly mean. If a battery has 4000 cycle, how do I know I have exhausted a cycle. How long a cycle of a battery? If my battery is a 25.6v, how do I know I spend a cycle on on it? Suppose during loadshedding it reads 26.0v and load till 25.3v, is that a cycle. And it happens three times a day (loadshedding) 2. Lastly, how do I know (calculate) a DOD of the battery. 3. How long (years) based on above can a battery lasts? Please help me, I am blank on this topic. Your responses will be highly appreciated

I might not been the correct bulk and float settings, but it's working well and perform according to expected. It start at 26.2v during loadshedding, in an hour's time it will be at 25.9v, when electricity comes back after two hours, it will be at 25.8v So far I haven't tested it in 4hours loadshedding. I will love to see how it will perform. I attached the picture of settled.

I appreciate the conversation on this topic of an Esener Lithium. I installed mine two weeks ago with a Growatt 3kva, after days of struggling with settings, I finally got it right more especially with the help from this forum. Let's keep helping each other. The Esener send me the attached settings which I also tested it for 3days and also works fine with my 3kva Growatt inveter...

Simplified: I bought Esener25.6v this March, I want to add another one but no cash now. Can I add it March next year? What are the do's and don'ts,? Will it be ok if I wait this period? I am using 3kva Growatt 24v currently with no panels. Thanks

Rephrase: can I wait a year before adding second or third?

Hallo. I also got this settings from Esener, I am also testing them to see how it works, they said it's new updated ones, hope it might also be useful

Thanks Let me know how the tests went, I think that can, might also be helpful in getting the correct settings. Can you assist me: N.B. How long can I add another Esener 25.6v to my existing one which I bought this year February, I want to add more power but I am not sure how long must I wait to add the second one. Is a year too soon, or too far? Your assistance will be appreciated Thanks

Need assistance If you buy a lithium lifepo4 BATTERY say this year, March, how long can you wait to add the second one, or even the third to increase power. Thanks

As per conversation of the above discussion, what will you recommend or recommendation for this battery with the inveter for the settings, 2,5,11,19,20,and 21 I will appreciate the get the 'final' verdict. Thanks

Hallo. Need an assistant, I am using Growatt 3kva 24v and currently bought an Esener Lithium 25.6v I am struggling to get the correct settings for : 2 5 11 19 20 21 I don't have panels but using grid to charge the battery Thanks

Hallo. I am also three months having the same model and same batteries, I also experienced the same, I made calls and research from various people and dealers. 1. It was then concluded that Growatt 3kva has two fans which runs it, the noise depends on the load and are not suppose to stop provided the inveter is provided load. 2. Best option is to install it little bit far if the noise factor might be a challenge 3. I was also adviced to keep the place closer to inveter dust free so that the fan might not accumulate dust and affect the smooth running of the fan. 4. I personally have adapted to the fan noise though it was too irritating the first week of installation 5. (Subject to correction and further inputs)

Hallo All. I am new and I need assistance. I have a Growatt 3kva 24v no solar panels yet. I am using leadAcid batteries 2by 24v which I think due to persistent stage of loadshedding might have been running dry. I have been following this forum and which I find it more helpful, I learned a lot. I am currently in need of Battery/batteries which might last longer as the ones am using its short span. I know nothing about communication of Battery to inveter, by so saying, I need battery that are compatible with my inveter,can be easily for me to connect, reliable, long lasting. I don't know which brands must I choose from, Gel or Lithium Any suggestions will be welcome