VanWykAC

Awesome software! you saved my life! I have a Kodak OG10 (Axpert rebrand) and 4 x Deichmann YL-R48100 Li-ion batteries and the BMS comms did not want to work. After several calls and lots of googling, I found the the issue lies on the Kodak side and there is no way of controlling it... until I found this app.. Let's see how it performs over the next couple of days. I have 2 questions: 1. What "battery setting" must my inverter be, I presume USER? 2. Will this be coming out in a Raspberry PI version?

Yes, mine has the round display

I presume my Kodak OG10 is the same as the Axpert Max? If so I see that my PV voltage also stays below 90V and then suddenly wakes up.

Did you buy the box or not? Did it resolve your issue?

Yes mine does and I have played around with pin outs on the LIC setting and still no joy. i will try and get hold of the CAN to RS485 converter from FreedomWon and try that out…

I see in this video there is a configuration option 14 where you can enable 3rd party control protocol. My Kodak OG10 does not have option 14

I see in this video there is a configuration option 14 where you can enable 3rd party control protocol. My Kodak OG10 does not have option 14

I have the Deichmann YL-R48100 by TheSunPays, rebranded Yilink

interesting... I found this - https://www.freedomwon.co.za/wp-content/uploads/Freedom-Lite-and-Axpert-Kodak-King-Interface-Tutorial.pdf It seems that there is an inherent issue with the comms. I will mail them and ask to see if this works.

by the way, all Kodak firmware files can be found here: https://365segen.sharepoint.com/sites/SegenFirmwareControlCentre/Shared Documents/Forms/AllItems.aspx?ga=1&id=%2Fsites%2FSegenFirmwareControlCentre%2FShared Documents%2FKODAK&viewid=67638a2a-c217-436b-9e6e-fc0ae45f8824 I see when downloaded, it states Axpert.. so Kodak is a rebrand.

Hi there, I have a Kodak OG 10 inverter, a rebranded Expert I presume. Do you have any new firmware for my unit as I can not connect to my BMS on my batteries via RS485, standard pinouts, 3-->8 and 5-->7.. Here with a screen shot of my device details. as you can see, no battery info

I will switch over from Lyth to Pyl settings to see if it makes a difference. The Axpert and Kodak is the same unit, it can only do RS485.

I have tried all possible RS485 cable pin outs and I still get error 61!

Hi there, I bought the Kodak OG10 with 4 x Deichmann YL-R48100 batteries but I cannot figure out the pin-outs, see images below/attached. Please help?? The inverter I spins 3 & 5 but the batteries indicates pins 1 & 2 as well as 7 & 8, not sure what to do here?