JacoBusa

Hi. I did sell my wifi modual and inverter. How do i unlink the device to my account. The new owner use my email as login to see his dongle. Any assist would be helpfull and thank u in advance

Did anyone mange to delink the device. I sold my unit and now thr new person needs to use my app login to acceses his wifi dongle

meccer expert 5000 watt 5000va pv 4000watt sol i ax 5p64. mppt is 60 to 140 i think. Thats why 3 serries, 2 maybe not enough and 4 might exceed

Good day. The inverter takes what it needs from panels. So its rated at 4000 watt pv and said do no exceed. But why then can u add panels to have more. I have 3900 watts total panels most i have seen is about 2300 watt. Panels dont deliver 100%. so can i add. I have 3 sets off 3 in serries 430 watt that is 1290 per serries and multiply by 3 3870. Max used on inverter 2200 that i have seen. I want to add 2 more rows off 3. Can i do it, how will this affect the max 4000watt of inverter. Thank U

Good day. How did u resolve the trip issue. I have the same problem. Tryed useing 20 watt for feeding grid power calibration. Next try 40 watt

Here is my sticker on the side. With all the info. Is it worth wile to upgrade firmware.

Good day I have an SOL-I-IS-4S mecer Hybrid 4KW pv inverter. I cant find any info on how to check my firmware. I cant find U1 where it is displayed. Is it worth while to do firmware upgrade. I am not even sure how old my unit is. Have bought it from someone that did an upgrade to bigger. Any advice will help. Thank U in advance

Yes, but invirter is set to max 10 amp. that is what i want to change but cant. Please see my added pictures where it show ma pv at 10 amp

In the image is where it show setting for my pv current. My inverter is rated at 5000w pv input. 10 serries panels of 250 watt and second bank in parralel total 5000 watt. I am an electrician by trade but these is all new to me, and have not been active in trade for over 8 years now. I did the install and inverter was bought from someone that upgraded. I am not sure how old it is, can find info on it. That is also why i want to check and upgrade firmware to see if i can then change this setting.

Good day. I have the sol-i-is-4s mecer 4 kw infinity inverter. Running with svlot 48v 5.09kw lifeop4 battery. Have 9 430 panels in serries. Settings that i want to change is where it say 10amp from pv my panels is 13.9. Cant seem to change. Also want to upgrade firmware as it seems thos is an old inverter. Thank u

Good day. I have this inverter sol-i-is-4s. Have u don firmware upgrade. Where do i look or find what i need. I use solar power to change settings. But there are i few i cant find