dkkr

Reviving this. I still have the issue where my max charge and discharge peaks just under 5kW. I noticed that my liBMS settings had current limits. Is there a way to change these?

Here’s a picture of the batteries

@JacoG I have 4 Elithium 51.2V 5.12kW batteries. I’ve attached a picture of the config. Thanks

Thank you for the detailed response.

Hi all. Just starting out and I think Im getting the hang of things. I have a 12kW 3 phase sunsynk inverter, 4 5.12kW batteries and 38 435W panels. everything seems to be working fine. At night, Ive been trying to see how much I can avoid eskom, and the batteries see me through. I noticed, however, that if the load increases by switching on a kettle, the total W used from the battery peaks out at around 4.83kW, and the balance gets pulled from the grid. Is there a way to only pull from the battery during these momentary peaks?

I have a similar setup. Can I do this myself if I have some network cable and connector plugs? How would I do it? A step by step will be highly appreciated 🙏

Hi All. New to the forum and to solar as well, but been using home assistant for my smart home for a few years. Keen to get started on integrating my new solar set up! any idea when there will be stock available for https://smarthomeintegrations.co.za/product/smartdeyedonglev4-intl-shipment ?