Azimuth

Hi Community, Is there a way to get the battery to start solar charging at a specific time, like 10:00 am currently it starts charging as soon as the panels start producing. At around 09:45 my panels are producing 5300 watts and I am told that power up to 6500 W can be produced with the surplus 1500 watts going to the battery. any help would be appreciated.

Is there any other way to use the extra 1500W like via the generator output

Best information I have received thus far. Thank you. I will try this and update

I have 6 X JA Solar 555 W panels on one mppt and 10 X 345 W panels on the other mppt of my Sunsynk 5kw inverter. The inverter is connected to the grid and can potentially do 6500 W. the inverter seems to be capping production at around 5300 W. Sunsynk have reportedly upgraded the firmware. The limiter has apparently been updated to 6300 W. production graph shows that production is still clipped to 5300 W. I saw similar issues were solved with upgraded firmware. Is there any other help that I can get. JA Solar 555W VOC = 50.02V and Isc = 14.07A Vmp = 42.11V Art Solar 345W VOC = 40.45V Isc = 10.84A Vmp = 33.69V

Please assist with the one day only password.

Any idea what the pin configuration on the RS232 port of the Imeon is. I don't have the ima box and am hoping to connect the RJ45 to the rs233 of the Imeon.

Good Morning, I'm looking for an Imeon 3.6 wireless communication box and some assistance with my Imeon installation.

Please contact me on 0829089920 to assist me with my setup. Alternatively,direct me to an installer who can help. I'm based in Durban so it may have to be remote help.

I'm new to the forum. I have just replaced my 3 KVA axpert for a Imeon 3.6 and find that the batteries are not charging. I may have selected the incorrect lead acid battery type and am not sure how to change it back. Any help would be greatly appreciated. I can be reached on 0829089920

Mike, Please contact me on 0829089920 for Imeon setup assistance. I will be happy to cover a call out fee even if the help is telephonic as I'm in Durban. Regards, Vishnu

I have exactly the same problem as DrakeSW please assist with reloading the picture as I cannot access it now. Any further help will be highly appreciated. Currently sitting in the dark as I have not solved the problem as yet.

Greetings, I have an Axpert 3kva that has a limitation of 600w I have 2 X 250wp feeding the inverter currently. I would like to a more solar without exceedin the restriction. Is it possible to charge another set of batteries with different solar panels and feed the inverter via the solar input port. This will obviously start at night when the main panels aren't supplying power. 2 X 100ah 12V AGM batteries are installed.