Petsvo

Eish that's bad, so i need a new inverter, i have taken pylontech recommended settings and applied, but the inverter is now complaining error 4 ( battery voltage too low)

https://portal.segensolar.co.za/reseller/docs/Axpert-MKSII_5KVA_manual.pdf

HI @Coulomb sent the wrong screenshot i meant the one below:

Hi, What are the recommended settings for my setup: I more like off the grid , i get grid power sparingly, if everything is normal my grid power only comes when i am sleeping from 11pm-5am so i always have fully charged batteries in the morning to start my day, the rest of the day i should be on solar and batteries. I have the following: 5KVA Mecer PF1 (5 kVA and 5 kW) 58.4 V Axpert MKS, with 145 V max MPPT. 1 Pylontech 3.5KVa battery Less than 1kva load during the day, 1 fridge, wifi router and TV, the load will only come to 25% at night when i switch on the lights. i pump my water in the tank between 11pm and 5am when grid power is available 8 panels mixed (4 X 330w and 4 X375w) at peak in the day i am getting 1.5 -1.7 kw at 110v from the panels. How can i program this setup on the attached pic

Hi, What are the recommended settings for my setup: I more like off the grid , i get grid power sparingly, if everything is normal my grid power only comes when i am sleeping from 11pm-5am so i always have fully charged batteries in the morning to start my day, the rest of the day i should be on solar and batteries. I have the following: 5KVA Mecer PF1 (5 kVA and 5 kW) 58.4 V Axpert MKS, with 145 V max MPPT. 1 Pylontech 3.5KVa battery Less than 1kva load during the day, 1 fridge, wifi router and TV, the load will only come to 25% at night when i switch on the lights. i pump my water in the tank between 11pm and 5am when grid power is available 8 panels mixed (4 X 330w and 4 X375w) at peak in the day i am getting 1.5 -1.7 kw at 110v from the panels. I would be happy if i can get recommended settings start afresh to setup the inverter.

Hi, What are the recommended settings for my setup: I more like off the grid , i get grid power sparingly, if everything is normal my grid power only comes when i am sleeping from 11pm-5am so i always have fully charged batteries in the morning to start my day, the rest of the day i should be on solar and batteries. I have the following: 5KVA Mecer PF1 (5 kVA and 5 kW) 58.4 V Axpert MKS, with 145 V max MPPT. 1 Polytech 3.5KVa batteries Less than 1kva load during the day, 1 fridge, wifi router and TV, the load will only come to 25% at night when i switch on the lights. i pump my water in the tank between 11pm and 5am when grid power is available 8 panels mixed (4 X 330w and 4 X375w) at peak in the day i am getting 1.5 -1.7 kw at 110v from the panels. I would be happy if i can get recommended settings start afresh to setup the inverter.

Hi, I have a: U1 74 40

yes connect them in parallel

I am new owner of a Mecer 5KVA from Mustek, at midday the inverter will stop charging and start to run on batteries until it deplets to zero or i have to restart it for the solar to come in. What are the setting for the inverter to run direct on solar if the load is low, i am generating 1.7kw from the panels and with 10% load during the day. I have a pylontech 3000 battery. I have also lost the password and username i got from mustek for the raspberry wifi for monitoring the inverter can it be resetted.

I am new to the forum, i have an axpert 5kva inverter and 2 ESM48100 batteries, what do i need to monitor the batteries, and how do they communicate with the century solar device and app i got from Mustek.