Mark de Klerk

My app has come right and I am able to see data and inverter online sinc about 9:00 this morning.

I have the same problem since yesterday morning. Plant visible on App and gateway online but no data from inverter which shows offline. Tried disconnecting dongle but still no joy.

I will ad my 5c. I brought my 5048 ES inverter in March 2020 with firmware 16168 installed which I have not updated. I am a firm believer that “ If it aint broken don’t fix it.” Only issue I have had is that every now again we trip the inverter but the inverter resets with no residual problem. I have resolved the tripping by using WiFi smart plugs to disable certain kitchen circuits when the geyser is switched on also with WiFi plug. My only disappointment is that I was under the impression I could draw 9200 VA when connected to the grid but was told by Dave Havenga this is not possible so do not understand what this number is in the device specs? If inverter were to pack up after 5 years would go for 8 kVA Deye/Sunsync.

I will ad my 5c. I brought my 5048 ES inverter in March 2020 with firmware 16168 installed which I have not updated. I am a firm believer that “ If it aint broken don’t fix it.” Only issue I have had is that every now again we trip the inverter but the inverter resets with no residual problem. I have resolved the tripping by using WiFi smart plugs to disable certain kitchen circuits when the geyser is switched on also with WiFi plug. My only disappointment is that I was under the impression I could draw 9200 VA when connected to the grid but was told by Dave Havenga this is not possible so do not understand what this number is in the device specs? If inverter were to pack up after 5 years would go for 8 kVA Deye/Sunsync.

Hi Daniemare. As a Mech Engineer understanding thermodynamics, I would recommend that the top clearance is the most important to maximize the “chimney effect” of the cooling fins at the back.

Hi. Sent this same request to Goodwe and reply I received is to leave on highest setting viz 4. It has to do with maximum charging current which is maximum at 4. I currently have 3 x Pylon US 2000 but will probably add two later. Still busy trying to optimize system.