Jump to content

Kobus Fick

Members
  • Posts

    16
  • Joined

  • Last visited

Everything posted by Kobus Fick

  1. No I did not find out what the problem was. I did a complete re-installation because of the refurbishing of our house and the problem seems solved. Makes me think the installer did something wrong. It now have surge arrestors and a switch between the batteries and the inverter.
  2. Thank you I will try this balancing.. I might just do it.
  3. Where can I find BatteryView? I did not check the voltage, just assumed they would be ok.. The one battery works 100% but the other one has issues.
  4. I had a re-installation of my Goodwe 5048 ES inverter with 2 Pylontech 2000B Plus batteries. They were in storage for about nine months. upon startup the one battery’s red light stays in and I get an intermittent BMS Internal Fault. Sometimes it is Normal. I charged the batteries by setting the inverter to Backup mode as we are using most of the generated power during the day, but SOC only went op to 84 %. diagnostic messages indicated in the attachment. Any advice will be appreciated.
  5. Thank you, I will attempt this, I did find the password in the mean time, so I might be possible. Much appreciated.
  6. Thank you CEF, noted and I understand. Great dashboard, much better than SEMS.
  7. Great tool thank you Cef. Can you let me know how you/they calculate Grid Imported Power outside of P.Invert.? Or where do you get it from? I have an installation where I have quite a few heavy users (appliances) of electricity that does not go through the inverter, and it does not show here when used. Your diagram shows exactly the configuration I have. Will appreciate.
  8. How do you manage the settings on you Goodwe Inverter (e.g. time based rules)? It must be through the installer application I presume? I have very limited ability on the app (SEMS Portal) that I have and not the login to the installer's app (PV Master). Can you advise how I can do more with the settings on the inverter?
  9. Yes I do, but need to fix the problem though. They might pay for damages but its recurring.
  10. The problem started after the installer worked on the wiring. The equipment that is damaged runs from the inverter at all times. The issue did not exist before.
  11. I read up on the wave form issue and according to the information I obained about the Goodwe Inverter is that it has a true Sine Wave. So it seems not to be the problem
  12. This might be it.. I will take up with the installer.
  13. The fridge guy said that there was a short between live and Neutral..
  14. Not all, but two small small bar fridges are on the backup side. I have two Pylon batteries 2.4Kwh ea. 4.8 Kwh total capacity backup. Not for a functional reason, rather bacause the electric circuit where the two fridges are also have the TV to be powered during backup times.
  15. Hi, I need some advice please: A Goodwe 4.6 Kwh Hybrid inverter was installed at my house late in 2020. Shortly after I had two fridges, an alarm system and the automatic gate motor damaged. Seems like the transformers and fridge compressors specifically sufferred. These are equipment that I had for a long time. but put them on the inverter output as part of the installation. Needless to say, after repairs it now happens again and again, even after I put in spike prevention plugs. Damage happens together with loadshedding occurances, I think. The installer is quite slow to assist and I would like some advice in handling the issue. Will appreciate.
×
×
  • Create New...