September 19, 20223 yr I'm Eskom fed and I've found that my analogue "wheel" only turns back if I export 3kw or less. When it rises to 10kw or more, the wheel stops. Is there a way I can limit the solar export power on my Sunsync 16kw inverter?
September 19, 20223 yr Author Thanks! Does that not limit the overall power? i.e. if I make that 2000 (from 16000) would it not limit the overall PV and or load capability ? From the manual: "This controls the maximum overall power, both to the ‘Load’ and ‘Grid’ ports combined. It is set to Low if an ‘over-current’ fault occurs" Sounds like it will turn my 16KW inverter into a 2KW inverter? I just need to limit the feed to the grid. Edited September 19, 20223 yr by HeinDuPlessis
September 19, 20223 yr Hmm....apologies if I led you astray..that's the field I used back when I was exporting. Perhaps it's changed since
September 19, 20223 yr On my SunSynk 8.8 kW machine under System Mode, there is a setting for "Max Sell Power", maybe this will work?
September 19, 20223 yr Author 1 hour ago, mzezman said: Hmm....apologies if I led you astray..that's the field I used back when I was exporting. Perhaps it's changed since No worries thanks 54 minutes ago, TimCam said: On my SunSynk 8.8 kW machine under System Mode, there is a setting for "Max Sell Power", maybe this will work? I don't see that option on mine, sounds like what I need though. Thanks.
September 20, 20223 yr 20 hours ago, HeinDuPlessis said: I'm Eskom fed and I've found that my analogue "wheel" only turns back if I export 3kw or less. When it rises to 10kw or more, the wheel stops. Is there a way I can limit the solar export power on my Sunsync 16kw inverter? Do you mind if I ask how hard was it to get all the forms filled in and stuff needed to get approved for feedback to the grid via eskom
September 20, 20223 yr Author 3 hours ago, Stefan Cornelissen said: Do you mind if I ask how hard was it to get all the forms filled in and stuff needed to get approved for feedback to the grid via eskom The forms are the easy part. But I've been trying to reach them for months on this, emailing documentation, waiting in calls just to be terminated when I'm caller number 4. I have case numbers and filled in forms. So maybe if they read this thread they can contact me for a change.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.