October 25, 20223 yr Hi. I have a sna5000 lupower inverter. I cant get the dongle to connect. I have tried everything. All it does is the bottom light is on and the middle one is flashing. I went into the ip address and set the wifi ssid and password there but still no luck. Any help please ?
December 30, 20223 yr On 2022/10/25 at 1:44 PM, Arthur Barrett said: Hi. I have a sna5000 lupower inverter. I cant get the dongle to connect. I have tried everything. All it does is the bottom light is on and the middle one is flashing. I went into the ip address and set the wifi ssid and password there but still no luck. Any help please ? Did you manage to solve your issue?
January 1, 20233 yr On 2022/12/30 at 7:30 PM, hoohloc said: Did you manage to solve your issue? Hi! Did you find a solution to this?
January 9, 20233 yr On 2023/01/01 at 6:19 PM, heinzg said: Hi! Did you find a solution to this? Hi, found the solution and it was right in front of my eyes all along 😁 . You need to use the laptop to set up the dongle Follow the below steps to configure wifi password via web. 1 insert your dongle with inverter, 2. Please connect laptop to local hot spot sent by the wifi module first when wifi LED on wifi module is solid on (The name of the hot spot is the same as the serial number on the wifi module shell). 3. open a browser and go through website 10.10.10.1 4. go to Station mode setting and change SSID/your home WiFi >scan >Encryption mode -enable > wifi passward> save 5. You will see wireless network list, select your home WiFi and click OK.> Yes. Then wait for 10 minutes the system will connect to internet. Note:1. Dongle does not work with 5GHz internet, only work with 2.4GHz internet 2. do not enter WiFI mode select and change stuff.
July 27, 20232 yr If you performed a factory reset on the dongle then have a look at this post... It describes the settings for the network that must be applied manually for the dongle to work again.
August 8, 20241 yr My good sir, you deserve whatever drink you like. Been stressing over this for a while now problem is solved!
March 31Mar 31 Hi, we are also having the same issue to connect the dingle but when connecting the dongle to the hotspot and trying to access the IP 10.10.10.1 we are unable to connect... Getting an error site cannot be reached
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.