January 8, 20251 yr Hi, I received the above inverter, which is not running. I checked the IGBTs and found that some of them were broken. So, I replaced them and checked all the components around. The defected IGBTs were related to the Buck circuit. After assembly and running on, the inverter is showing normal operation. However, I tried to measure the output voltage, and found out that no Voltage there! I checked the configuration multiple times and did a factory reset, but the issue still persists. I attached the screenshots below for reference. If anyone could explain what's happening would be very helpful. Thanks
January 8, 20251 yr Is this a rebranded Deye? Under normal operation connected to the grid the AC light should be on as well Edited January 8, 20251 yr by madness_za
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.