March 29, 20206 yr Good Day, I've installed a 600W Hoymiles microiverter system, with Efergy clamp on CT for backfeed blocking. I just cant get the thing to work..... Lastest software is installed, Anti-Reflux is enabled I've followed a post on the forum but it is vague and I can see the settings they are refering to (I did log in as installer), I understand MI State as shown below must be "ON" but how to switch it on? Any help please. Thanks
March 30, 20206 yr Author I've managed to get the settings needed, however how do I "pair" the CT transmitter to the DTU? Anyone please, Thanks
March 30, 20206 yr 35 minutes ago, paulw said: I've managed to get the settings needed, however how do I "pair" the CT transmitter to the DTU? Anyone please, Thanks Sent you the manual...
March 30, 20206 yr Author Hi Greenman, thanks for the manual but I'm not using the same meter as referred to in the manual. I'm using the wireless Efergy energy transmitter, I assume I have to bind this in some way to the dTU.
March 30, 20206 yr You have the FBIADTUEL DTU ? If yes, the manual is the correct one. See step 7. "Enable zero export & Transmitter setup" ?
March 30, 20206 yr Author @GreenMan Theres nou steps... You attached a datasheet. No manual showing steps. Or mabe Im confused🤣 Edited March 30, 20206 yr by paulw
March 30, 20206 yr Author @GreenMan Found it thanks.....however my transmitter doesnt show a SID number. 😂😂🙈🙈
April 2, 20206 yr On 2020/03/30 at 6:22 PM, paulw said: @GreenMan Found it thanks.....however my transmitter doesnt show a SID number. 😂😂🙈🙈 I checked one of my transmitters and it does have the number. Remove the batteries on your transmitter. You should find a small printed label on the inside of the battery compartment on which the SID number is printed.
April 2, 20206 yr Author On 2020/03/30 at 4:34 PM, GreenMan said: @GreenMan Mine didnt have any stickers except for the QC checked sticker. I eventually stripped open the transmitter to check the ic board.... Luckily there was a sticker on the chip. Edited April 2, 20206 yr by paulw
November 14, 20205 yr On 2020/03/30 at 3:59 PM, GreenMan said: Sent you the manual... Hi could You please send me the manual as well? thank you
November 18, 20205 yr On 2020/11/14 at 6:05 PM, Johanc said: Hi could You please send me the manual as well? thank you Johan PM me your email address and I will email to you.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.