May 22, 20206 yr Good evening I have two questions on the king 5kw OG-plus 5.48 inverter hope someone can help. 1) I have installed 2 inverters in parallel with 4 x 3.5KW pylon Batteries - my question is, do I need to split the data cable between the 2 inverters? I connected the data cable to the rs485 and bms port of my master inverter (setting 5 - PYL) and do have communication. The slave inverter I set to USE and (12 - 48V) (13 - 51V) (26 and 27 - 53.2V) (29 - 47V) 2) how do I take a data log to see what happened through say the last 2 days? When I connect my laptop to the usb with a cell phone cable I can take a log but as soon as I disconnect the pc then I only have the information that I collected whilst connected, is there a way to get recordings through the day without the pc connected. thank you in advance
May 22, 20206 yr 49 minutes ago, Jurgens said: 1) I have installed 2 inverters in parallel with 4 x 3.5KW pylon Batteries - my question is, do I need to split the data cable between the 2 inverters? It depends on the software monitoring them. Usually that software knows how to send commands that refer to the other inverters. 49 minutes ago, Jurgens said: I connected the data cable to the rs485 and bms port of my master inverter (setting 5 - PYL) and do have communication. The slave inverter I set to USE and (12 - 48V) (13 - 51V) (26 and 27 - 53.2V) (29 - 47V) I would think that it would not let you make these settings different to the master. If it does, I'd assume that it would ignore those settings.
May 22, 20206 yr IMO you should get Pi with ICC and PYL Tech communication cable, will give you all need in terms of control and reading.Only needs to be connected to master inverter www.iccsoftware.co.za Edited May 22, 20206 yr by Quat Allah As Shams
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.