Hi everyone, I hope someone can assist me with this issue.

I recently had a system installed.

2 x 5kVa Deye Hybrid Inverters

3 x Pylontech US3000C batteries

12 x 400w Panels.

 

No matter what I do, the inverter uses the grid to power the load, unless I switch the grid off, then only it switches over to panels and batteries.

Did you mannage to find a solution.

 

I have the same issue

5 minutes ago, KobusK said:

Did you mannage to find a solution.

 

I have the same issue

Can you share your settings? 

The problem I have is that when I connect my batterye it feeds into the grid.

 

I can only use it without the battery.

I have turned the CT around, put in other position's, the only way for not to feed is to disable.

 

Another thing with the baterrye it works fine from solar PV but the I need to tick solar sell the one next to zero export to CT.

 

I have even played around with the quantity of zero export and max sell power, no luck

I think I found the solution.

 

I disabled the battery, left the settings and plugged the BMS cable in the inverter and and CAN of the Pylontech, switched everything AC/DC power switched on and left it for about 10 minutes and walla 

 

 

NOOOOOOO, still looking for the correct settings , it keeps on feeding back into the grid as soon as I activate the battery.

On 2020/12/25 at 12:18 PM, Achmat said:

Can you share your settings? 

 

55 minutes ago, KobusK said:

Change your max sell power to the highest value. This is the power that the inverter is "selling" to the home. 

This is from my sunsynk. 

Edited December 27, 20205 yr by Achmat

57 minutes ago, KobusK said:

You only need to activate the battery for a new battery. You can remove the tick for activate battery. 

Thanks removed

Changed value

I have changed the max sell power and it still does not pull from the pv

Still not using the PV

Cab you share your time off use settings. 

You can also put in a small value in zero export power of 20w and see if it has an impact. 

Same problem. The only way Incan “get the PV” to work if i use solar sell. My prepaid is billing it😡

If i tick it the pv works 

Now it feeds into the grid

Do you have a screen similar to this one. 

I will ned to get it from the APP. Just waiting for the latest polling.