Hi Guys

 

I am looking for something along the lines of the ICC APM software that can control Sonoff devices based on what's specified events on a Sunsynk Inverter.

My understanding is that the ICC software is not compatible with the Sunsynk inverters 

Specifically I would like to disconnect some items from drawing power when the Inverter detects load shedding.

It is unfortunately not possible to add them onto the non-essential loads. 

If there are any other suggestions as to how I could accomplish this I am open to suggestions. 

 

Thanks

JohnB

 

Hi Guys

 

I am looking for something along the lines of the ICC APM software that can control Sonoff devices based on what's specified events on a Sunsynk Inverter.

My understanding is that the ICC software is not compatible with the Sunsynk inverters 

Specifically I would like to disconnect some items from drawing power when the Inverter detects load shedding.

It is unfortunately not possible to add them onto the non-essential loads. 

If there are any other suggestions as to how I could accomplish this I am open to suggestions. 

 

Thanks

JohnB

Pulling up a old thread but I guess this is where it all started?

Lol @McGuywer , it is amazing what a group of people with a common goal can work out when everybody shares their ideas. 

The community has really progressed a lot since then 🙂