Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HyperCut

Members
  • Joined

  • Last visited

  1. Are these still available ?
  2.    HyperCut reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  3.    HiTech reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  4.    mzezman reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  5. Pv Production for the day +/- 33kWh I have a Dewhot 16 CT Gas geyser installed for the bathrooms. The CT (Constant temperature) range geysers adjust the flame to output a set temp on the digital display. So if warmer water enters the geyser the flame adjust accordingly and uses less gas. The Electric geyser will be installed with a solar valve. The solar valve diverts water to the gas geyser if the temperature drops below 45 Deg and bypass the gas geyser if above 45 Deg. You can adjust the temp setting by 5 deg. Electric geyser will be set on 65 Deg, Hopefully on nice sunny days no gas will be used.
  6.    system32 reacted to a post in a topic: Information on Company : www,mvsolar,co,za
  7. HyperCut changed their profile photo
  8. @AC-DC AVG production is around 22 kWh per day, soon to go up, will be adding a 150 liter geyser (3kw) to preheat water for the gas geysers and heat-pump for the pool. Over some weekends we do manage to reached 50 kWh per day with the kids using the aircons. Battery charge is set to 180A on Inverter so each batt can take 60A
  9. Yes a very good friend of mine that i am currently working with.
  10.    HyperCut reacted to a post in a topic: Sunsynk aux load for geyser
  11.    HiTech reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  12.    HiTech reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  13. Very neat install, Yup 16mm2 are a challenge but somebody has to do it ☝🏼
  14.    BryanOC6 reacted to a post in a topic: Most Expensive DIY project yet.....HeHeHe
  15.    JpPaulKruger reacted to a post in a topic: Sunsynk 3Phase Setup. (3x8.8kw)
  16.    Yellow Measure reacted to a post in a topic: Sunsynk 3Phase Setup. (3x8.8kw)
  17. I agree SunSynk’s way better than some of the other more expensive “blue” units 😉
  18.    HyperCut reacted to a post in a topic: Sunsynk 3Phase Setup. (3x8.8kw)
  19.    HyperCut reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  20.    HyperCut reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  21.    system32 reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  22. Just a cover for all the Surfix cables entering the DB
  23. Yup same here after the upgrade, lovely to have them working as they should !!
  24.    HyperCut reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  25.    HyperCut reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  26.    HyperCut reacted to a post in a topic: Hubble Lithium Battery AM-2 5.5kWh
  27.    HyperCut reacted to a post in a topic: Sunsynk 8kw with 2 x BSL 5.1kwh
  28. Bought from a Electroware in Vereeniging.
  29. Obo trunking available in 2m only paid +/- R600 per length, 90 Corners +/- R140 and T-joint +/- R140
  30. So my system been running for a few months now and the amount of power we have available is just beyond my expectations. Decided to add another Hubble for a total capacity of 15 kWh with an average of 35% SOC in the morning. Prepaid meter been standing still for 2 months even with all the cloudy / rainy days we managed to not use the grid. SHOULD HAVE GONE TO SOLAR YEARS AGO !!!
  31. Hey Brett, sorry for the late reply been busy with a couple of other installations. Bought from my local electrical supplier it is called OBO Trunking from o-line.co.za Makes for a neat installation but have to warn you it is expensive.
  32. Make me a offer......
  33. Currently used as a big ass UPS. Weather is a problem as i want to paint my roof before i install the panels.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.