Jawwaad

Hey guys, What settings do i need to change to get this card to display the full area of my dashboard in HA? I have a specific dashboard that only has this one card (used as a display in kitchen) but the card is not big enough. Want to use the full dashboard space. type: custom:sunsynk-power-flow-card cardstyle: full show_solar: true battery: energy: 5120 shutdown_soc: 20 show_daily: 'yes' solar: show_daily: true mppts: 2 pv1_name: West pv2_name: East load: show_daily: true additional_loads: 1 load1_name: Geyser grid: show_daily_buy: true show_daily_sell: 'no' show_nonessential: false entities: use_timer_248: switch.ss_use_timer priority_load_243: switch.ss_priority_load inverter_voltage_154: sensor.ss_grid_voltage load_frequency_192: sensor.ss_load_frequency inverter_current_164: sensor.ss_inverter_current inverter_power_175: sensor.ss_inverter_power grid_connected_status_194: binary_sensor.ss_grid_connected inverter_status_59: sensor.ss_overall_state day_battery_charge_70: sensor.ss_day_battery_charge day_battery_discharge_71: sensor.ss_day_battery_discharge battery_voltage_183: sensor.ss_battery_voltage battery_soc_184: sensor.ss_battery_soc battery_power_190: sensor.ss_battery_power battery_current_191: sensor.ss_battery_current grid_power_169: sensor.ss_grid_power day_grid_import_76: sensor.ss_day_grid_import day_grid_export_77: sensor.ss_day_grid_export grid_ct_power_172: sensor.ss_grid_power day_load_energy_84: sensor.ss_day_load_energy essential_power: sensor.ss_essential_power nonessential_power: sensor.ss_non_essential_power aux_power_166: sensor.aux_output_power day_pv_energy_108: sensor.ss_day_pv_energy pv1_power_186: sensor.ss_pv1_power pv2_power_187: sensor.ss_pv2_power pv1_voltage_109: sensor.ss_pv1_voltage pv1_current_110: sensor.ss_pv1_current pv2_voltage_111: sensor.ss_pv2_voltage pv2_current_112: sensor.ss_pv2_current essential_load1: sensor.sonoff_1001323a35_power large_font: true panel_mode: true show_battery: true card_width: 400px

Hi guys, Just checking in if anybody has found a fix for this yet? My manual fix is to deplete the battery (battery, kettle and geyser on) to 90% to trigger the charging again. That's obviously not sustainable though. I don't actually mind if it stayed at 95%, but when it just gets stuck at 91%, that's kinda frustrating.

Have you managed to find a definitive answer to this? I too am wrestling with the idea of aux load vs non-essential (but connected to still use pv) vs connecting geyser to essential and just using a geyser timer. I would also like to use aux only when there’s enough pv. But say at night, and I want to switch geyser on for an hour, that it rather use the grid in that instance.

Hi guys, I’m awaiting installation of my 8kw deye and also exploring what options exist (besides SolarAssistant) to manage parameters remotely.@Sc00bs, did you manage to sort this out?