Renier

for shoto to know if its the bms if the run light is off and you check your soc on the solar man ap and if its spiking 100% then 0% its bms issue i change to bms so far on two different sites , december 2021 changed in march  22 2022 , 2nd site Jan 2022 changed 01 march 2022 
i dont like when this happens because customers think we giving faulty products . 
 
does anyone know where i can purchase some bms i need 6

Hi Nicholas. 
I have installed quite a few BSLB 5.1kwh. No issues whatsoever in 18 months. I have the 2 x 6.4kwh in my own home and also no issues. 
BSLB now have the 8.2kwh battery. Great product. Also 1C 

Perhaps your experience is valid for Voltronic inverters; their most common failure mode is self-destruct. 🤣

Hi Zak.
I have the same LCB battery no user manual supplied did you come right with a user manual.i need one and have emailed for support from LCB battery website.my installer cannot get battery to work with my parallel meter 5kva inverters.im hoping you  have info for me on this battery.

So I've been busy on a 48v 16s 200ah (10kWh) battery for a while, cost is around R25K. this very same article mentioned above is why I'm pushing up the release timeframe.
The BMS key features are a screen, canbus communication、rs485 communication (master slave comms)、cell balancing、Individual cell over voltage protection、Over/under voltage protection、temperature protection, over charge/discharge protection, over current protection, Short circuit protection etc.
in addition the BMS can support up to 16 units in parallel. 
Li Ion cell options are 4000 cycle,  Cell Charge is 1C/ Discharge is 3C, although specs will state 0.5C on both.
The key features are affordability and universal pylontech compatibility, Support and warranty will be local. 
atm the eta is around 7-10days from order. Please let me know if this is of interest to anybody.

That should be a picnic to wire up 🤣.
Just noticing the picnic tables in the background...