Asto

kindly confirm 3.3kw srne inverter specifications. The one that I know has a maximum PV input voltage of 145v and is also a 24V battery system.

Access rights :User and Installer, I have tried to reboot but nothing is changing I am using CCGX ,I have updated the firmware to v2.60

two way enabled ! on ethernet!

No errors

Hi team, what could be the problem .The dashboard,Advanced settings etc all are accessible but failing to connet or access Remote console.

Hi All, I have installed 4 bluenova racpower on a system with a Victron 8kVa,2x smart solar mppt 250/100. The challenge I am facing is to increase the charging current,it is not going beyond 17A, it only increase beyond 17A to about 100A when the CAN cable from the Master to the CCGX is pulled out but for a short then alarm comes on the CCGX,I tried to use DIP switches but an error warning (internal failure ) comes up. Anyone who had encountered this can advise with the remedy.

Good day , I would like to ask how I can clear this error displayed on a bluenova battery " ERROR" CellComsErr

Dear all , I have an axpert mecer 5kVA/5kW inverter and 6x pylontech us2000 installed for a client. The batteries are fully charged but the inverter is displaying 50% and still charging. What could be the problem?

Dear All, I would to ask if anyone has ever used dry contacts on axpert inverters to auto start/stop a genset?

Noted, thanks very much.

I want to install 3 phase 15kVA victron inverter system with a GX device and a 15kW fronius inverter,

hi, i would like to ask if the system can run smoothly with victron energy meter used in conjuction with fronius energy meter?

thanks @Coulombyour magic worked out.

Thanks for the information,its a recent model (those with high PV input voltage). I will try your recommended values and advise you on the results!

Hi, i have an installed a mecer axpert 5kVA inverter, 4xUS2000 pylontech,10x 340W solar panels. the only settings availability in terms of priority are U, SBU and S only. I have selected SBU as per the client's request but Utility is charging the batteries whenever the sundisappears,it is not using batteries.What could be the problem setting 12 - 47.5V setting 13- 52.2V setting 26- 53.2V setting 27 - 51V setting 29 - 46.5V

dear friends, may you please assist me on this one. i have 3x 8kVA Quattro inverters, all to be connected in a 3 phase set up.I have my AC in from a 3 separate double pole 63A into individual 3 quattros.,CCGX powered up,pylontech US2000 connected. VE Bus cables connected from the first quattro-2nd quattro ,3rd quattro the into the CCGX, I have set same values (charge current,float,absorption etc for each quattro). the errors i am getting on the CCGX #3, #10,#17 can someone give me light to solve this? This is my first 3phase victron installation.

Yes I have a CCGX Device loaded

Hey guys how do you program solar priority setting on quattro inverters with mppt smartsol 250/100

Thanks for the information very helpful. One more question, Are you using the cable pack US2000/US3000 supplied with Pylontech? If not ,how do you connect the Pylontech with a much thicker cable say 70mm2.This is for a victron -pylontech installation.

hi friends,can someone share with me a wiring diagram for a 3 phase 3x8kVa quattro inverter system?

good afternoon friends,I am planning a 15kVA 3 phase installation consisting of 3x5kVA Quattros,Pylontec US3000,solar panels and 3x victon smartsolar mppt,CCGX.Anyone with a wiring diagram who is will to share with me? You may send it here or email me at [email protected]

Noted,Thanks very much!

The challenge is that the inverter settings are interms of voltage and I would like to set them at 50% DOD

Good day people,I have a small question on how to determine the percentage DOD for a 24V system when the voltage is at 20V,21V,22V etc. Anyone with a calcution formula?

I am having a same problem but this time with 3*US2000 pylontech and a Kodak MK .I put setting 5 to PYL but there error 61 started flashing,still on this setting I couldn't change values.After less than an hour the inverter disconnected all chargers and no output.I then put the setting 5 on USE and manage to adjust the values and now seems working. Looking forward to seeing what will happen in the next hour.