Kingsway

Thanks. I’ll give it a go and see what happens.

@Scorp007 the 31 export is for the month on Nov. even though its setup as no export. It still doesn’t account for the large difference though.Even on a daily basis, the consumption on the app reading is lower than actual units on the prepaid meter. The meter is using 15 units on a sunny day when the app says i should have used 2kwh. Ill get installer back to check CT coils installation

@madness_za no its not setup to export to grid. I dont have a bi directional meter.

Thanks. I’ll give it a go and see what happens.

The entire db is connected to the inverters.

Hi Folks, I have 2 12kva 3 phase inverters, 2 x 10Kw batteries and 20 panels. My entire DB is connected to the system to run the entire house. It’s been running for 8 months now. I however noticed, that despite batteries being full, enough solar production, there is a still a continuous draw from the grid. To give perspective, according the SUNSYNK app, I should have used approx 300 units from the grid, but i have purchased 900 for the month. Soc set to below 40%. Any ideas?

Mine started with the same issue. 2x 12 kw I did not do any updates unless it did so automatically. Any views?

I'll have my US 3000 available in the next 3 weeks or so. Replacing my whole system in the coming weeks. Working perfectly fine, 2 years old. I don't know how many cycles it has done. I have the growatt app, but it doesn't display the cycles.

Hi Folks, So I've been running completely stable on my backup kit (growatt and pylon tech), but for the first time today the SOC Led's are blank. Every few seconds, they all flash on and off simultaneously. The 'run' light still flashes as normal. This has never happened before. Normally all the LED's are on, unless we loadshedding when the battery is running down. My FW updates were done at time of installation so the BMS was always working fine. Any ideas? Thanks

STM32F030CC_SK036

Still not sorted but I live with it. I get readings daily, but just some have some hours missing here and there. I did receive another firmware update from China but still didn't help. Ps: the dongle should be flashing blue if everything is fine.

No, I have Pylontech Batteries. L02