Gooseza

I am working on a Home Assistant automation to do the automatic adjustment of battery settings based on the load shedding levels as well as the solar forecast for the next day.
Will post a video when I have it all worked out 🙂 
Pretty sure I can get it done without having to go to Node Red.

If you look at the bottom URL is says [email protected] <----very suspicious.

If you look at the bottom URL is says [email protected] <----very suspicious.

If you look at the bottom URL is says [email protected] <----very suspicious.

I have an ESP32 integration with the Inverter to pull the data into HA sensors, and I'm trying to update the SOC depending on what stage loadshedding is going on: this is the idea:


I can manually slide these sensors in HA, which updates the Inverter settings (number.set_soc_timezone1)

 
What I'm struggling with is to understand the configuration of the call service node. Any ideas? 
 

 

This worked, and for both of my setups! I'm so happy and relieved, thank you! I'm going to make some comments on Sc00bs youtube video to help the next person along, as a bit more explaining is needed in a couple of areas.

For the next person: Add the Orange (2) and Brown strip  (7) to A..... and Orange stripe (1) and Brown (8) to B  

Apologies, I posted my reply before you edited your initial post. But yes, this makes perfect sense! And thanks for the pictures, they're always worth a thousand works! Cheers