Wanda

Hello Everyone Is it possible that an inverter firmware update can solve error 51 on a Kodak OG5.48 inverter. Thank you.

It's a rather overzealous feature, me thinks. I have to be forced to run extra unnecessary loads just so that the inverter doesn't switch off critical light loads like the Wifi modem, computer & phone charging points

Hi Sorry for the late response. When mine switches off it doesn't come on by itself I have to switch it back on but if I ignore it comes back on when the panels start charging the battery. I'm trying to get help from Luxpower in China.

The system has no grid supply

The system consists of 6 x 400w panels , 1 x 100Ah LiFePO4 battery and the battery type is set as Lead-acid on the inverter. The switching off occurs only during the night when the load gets smal like having house lightning.

Hello. Im having a challenge with my luxpower sna5000 inverter. When the load is very low, say when on lights alone, the inverter cuts out. What could be the problem? Thank you.

Alright! Thank you. Much appreciated

Hello everybody. What is the cheapest option for remote monitoring of electric motor starters like Soft starters & Variable frequency drives. Is the Raspberry pi feasible? Thank you

Hello. I had a Pylontech UP5000 that got discharged untill it when into alarm mode last night but now it's not charging. I'm using a Koda5kva VMIII inverter. Is there a way to switch the battery back on. Thank you.

Here is the Pylontech firmware update file https://drive.google.com/drive/folders/1ObOvQsTTTNH9zS2AtbvqYoB_8fIba57M Unfortunately I haven't resolved the issue. I bought a cheap USB to RS232 adapter that failed to work properly hence I couldn't do the firmware update that I gathered would possibly clear the communication error. You could try updating both inverters to the latest firmware and do the same for Pylontech. You can get the latest firmware versions for Kodak on the Segen solar website.

Unfortunately I haven't resolved the issue. I bought a cheap USB to RS232 adapter that failed to work properly hence I couldn't do the firmware update that I gathered would possibly clear the communication error. You could try updating both inverters to the latest firmware and do the same for Pylontech. You can get the latest firmware versions for Kodak on the Segen solar website.

Thank you much appreciated.

Thank you 🙏🏽

Hello I have a Kodak VM III connected to 2 x pylontech UP5000 showing Error 61 but that error 61 does not appear in the manual. What does it mean. Thank you.

Hello. I have a UP5000 which now uses RJ45 on the console port. How do I connect the RJ45 to the DB9. Thanks